PDF Only
$35.00 Free Updates Upto 90 Days
- CWNA-108 Dumps PDF
- 121 Questions
- Updated On April 15, 2024
PDF + Test Engine
$60.00 Free Updates Upto 90 Days
- CWNA-108 Question Answers
- 121 Questions
- Updated On April 15, 2024
Test Engine
$50.00 Free Updates Upto 90 Days
- CWNA-108 Practice Questions
- 121 Questions
- Updated On April 15, 2024
How to pass CWNP CWNA-108 exam with the help of dumps?
DumpsPool provides you the finest quality resources you’ve been looking for to no avail. So, it's due time you stop stressing and get ready for the exam. Our Online Test Engine provides you with the guidance you need to pass the certification exam. We guarantee top-grade results because we know we’ve covered each topic in a precise and understandable manner. Our expert team prepared the latest CWNP CWNA-108 Dumps to satisfy your need for training. Plus, they are in two different formats: Dumps PDF and Online Test Engine.
How Do I Know CWNP CWNA-108 Dumps are Worth it?
Did we mention our latest CWNA-108 Dumps PDF is also available as Online Test Engine? And that’s just the point where things start to take root. Of all the amazing features you are offered here at DumpsPool, the money-back guarantee has to be the best one. Now that you know you don’t have to worry about the payments. Let us explore all other reasons you would want to buy from us. Other than affordable Real Exam Dumps, you are offered three-month free updates.
You can easily scroll through our large catalog of certification exams. And, pick any exam to start your training. That’s right, DumpsPool isn’t limited to just CWNP Exams. We trust our customers need the support of an authentic and reliable resource. So, we made sure there is never any outdated content in our study resources. Our expert team makes sure everything is up to the mark by keeping an eye on every single update. Our main concern and focus are that you understand the real exam format. So, you can pass the exam in an easier way!
IT Students Are Using our Certified Wireless Network Administrator Dumps Worldwide!
It is a well-established fact that certification exams can’t be conquered without some help from experts. The point of using Certified Wireless Network Administrator Practice Question Answers is exactly that. You are constantly surrounded by IT experts who’ve been through you are about to and know better. The 24/7 customer service of DumpsPool ensures you are in touch with these experts whenever needed. Our 100% success rate and validity around the world, make us the most trusted resource candidates use. The updated Dumps PDF helps you pass the exam on the first attempt. And, with the money-back guarantee, you feel safe buying from us. You can claim your return on not passing the exam.
How to Get CWNA-108 Real Exam Dumps?
Getting access to the real exam dumps is as easy as pressing a button, literally! There are various resources available online, but the majority of them sell scams or copied content. So, if you are going to attempt the CWNA-108 exam, you need to be sure you are buying the right kind of Dumps. All the Dumps PDF available on DumpsPool are as unique and the latest as they can be. Plus, our Practice Question Answers are tested and approved by professionals. Making it the top authentic resource available on the internet. Our expert has made sure the Online Test Engine is free from outdated & fake content, repeated questions, and false plus indefinite information, etc. We make every penny count, and you leave our platform fully satisfied!
Question # 1
When an ACK frame is not received by the transmitting STA, what is assumed?
A. The receiver processed the frame, but did not respond with an ACK frame because 802.11w is enabled
B. The frame was correctly delivered
C. The frame was not delivered and must be retransmitted
D. The receiver is offline
Question # 2
You are tasked with performing a throughput test on the WLAN. The manager asks that you use open source tools to reduce costs. What open source tool is designed to perform a throughput test?
A. iPerf
B. PuTTy
C. IxChariot
D. Python
Question # 3
You have received a report of poor wireless connections on the third floor of a building under your administration. Three individuals have reported the problem. Apparently, the connections are reporting a strong signal, but the users cannot access the Internet. With the problem identified, what is the next logical step in the troubleshooting process?
A. Verify the solution
B. Discover the scale of the problem
C. Perform corrective actions
D. Create a plan of action or escalate the problem
Question # 4
A WLAN is implemented using wireless controllers. The APs must locate the controllers when powered on and connected to the network. Which one of the following methods is commonly used to locate the controllers by the APs?
A. NTP
B. DHCP
C. SNMP
D. GRE
Question # 5
Your manager asked you to locate a solution that allows for centralized monitoring of WLAN performance over time. He wants a single pane of glass for administration and monitoring of the solution. What do you recommend?
A. Laptop-based spectrum analyzers
B. AP-based spectrum analysis
C. Overlay WLAN monitoring solution
D. Laptop-based protocol analyzers
Question # 6
What is appended to the end of each 802.11 data frame after the payload?
A. Preamble
B. MAC header
C. PHY header
D. FCS
Question # 7
What cipher suite is specified by the 802.11-2016 standard and is not deprecated?
A. Wired Equivalent Privacy
B. Temporal Key Integrity Protocol
C. Counter Mode with CBC-MAC Protocol
D. Extensible Authentication Protocol
Question # 8
When compared with legacy Power Save mode, how does VHT TXOP power save improve battery life for devices on a WLAN?
A. Legacy Power Save mode was removed in the 802.11ac amendment.
B. VHT TXOP power save allows the WLAN transceiver to disable more components when in a low power state.
C. VHT TXOP power save uses the partial AID in the preamble to allow clients to identify frames targeted
for them.
D. VHT TXOP power save allows stations to enter sleep mode and legacy Power Save does not.
Question # 9
A WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB loss. If the cable is connected to an antenna with 9dBi gain, what is the EIRP at the antenna element?
A. 26 dBm
B. 13 dBm
C. 23 dBm
D. 10 dBm
Question # 10
You were previously onsite at XYZ’s facility to conduct a pre-deployment RF site survey. The WLAN has been deployed according to your recommendations and you are onsite again to perform a post-deployment validation survey.When performing this type of post-deployment RF site survey voice over Wi-Fi, what is an action that must be performed?
A. Spectrum analysis to locate and identify RF interference sources.
B. Frequency-band hopping analysis to detect improper RF channel implementations.
C. Application analysis with an active phone call on an VoWiFi handset.
D. Protocol analysis to discover channel use on neighboring APs.
Question # 11
What statement about the beamwidth of an RF antenna is true?
A. Horizontal and vertical beamwidth are calculated at the points where the main lobe decreases power by 3 dB.
B. The beamwidth patterns on an antenna polar chart indicate the point at which the RF signal stops propagating.
C. When antenna gain is lower, the beamwidth is also lower in both the horizontal and vertical dimensions.
D. Vertical beamwidth is displayed (in degrees) on the antenna’s Azimuth chart.
Question # 12
You are reconfiguring an AP to use the short guard interval. How long will the new guard interval duration be after the change?
A. 800 ns
B. 400 ns
C. 104 ms
D. 10 ms
Question # 13
What ID is typically mapped to an AP’s MAC address if a single BSS is implemented?
A. SSID
B. Device ID
C. VLAN ID
D. BSSID
Question # 14
What primary metric of scanning can stations use to select the best AP for connectivity to the desired BSS?
A. Signal strength of AP beacons received.
B. PING latency when testing against an Internet server.
C. Throughput speed in Mbps.
D. FCS errors in frames transmitted to and from the AP.
Question # 15
During a post-implementation survey, you have detected a non-802.11 wireless device transmitting in the area used by handheld 802.11g scanners. What is the most important factor in determining the impact of this non-802.11 device?
A. Receive sensitivity
B. Channel occupied
C. Airtime utilization
D. Protocols utilized
Question # 16
Which one of the following is not a factor considered when calculating the Link Budget for an outdoor point-to- point WLAN bridge link?
A. Operating frequency
B. MU-MIMO capabilities of the bridges
C. Receive antenna gain
D. Transmit power
Question # 17
A dual-band 802.11ac AP must be powered by PoE. As a class 4 device, what power level should be received at the AP?
A. 30 W
B. 12.95 W
C. 25.5 W
D. 15.4 W
Question # 18
You are deploying a WLAN with the access points configured for 10 mW of output power on the 2.4 GHz radios and 20 mW of output power on the 5GHz radios. Some semi-directional antennas are also in use. What kind of deployment is described?
A. SOHO
B. Residential
C. High density
D. Standard office
Question # 19
You are performing a post-implementation validation survey. What basic tool can be used to easily locate areas of high co-channel interference?
A. Throughput tester
B. Laptop-based spectrum analyzer
C. Access point spectrum analyzer
D. Wi-Fi scanner
Question # 20
An IEEE 802.11 amendment is in the daft state. What impact does this draft amendment have on the 802.11 standard?
A. Devices will be released based on the draft amendment and the draft amendment features are part of the standard.
B. No impact: Until an amendment is ratified, it does not become part of the standard.
C. No impact: Draft amendments do not become part of the standard until a working group is formed.
D. The standard is changed to reflect the new capabilities as soon as an amendment enters the draft stage.
Question # 21
What statement is true concerning the use of Orthogonal Frequency Division Multiplexing (OFDM) modulation method in IEEE 802.11 WLANs?
A. OFDM implements BPSK modulation to allow for data rates up to 7 Gbps.
B. OFDM was first introduced in 802.11a and is used by the ERP, HT and VHT PHYs as well.
C. OFDM modulation is used only in 5 GHz 802.11 transmissions.
D. OFDM was used by Frequency Hopping Spread Spectrum (FHSS) PHY devices.
Question # 22
In addition to coverage analysis results, what should be included in a post-deployment site survey report to ensure WLAN users experience acceptable performance?
A. WAN interface analysis results
B. Capacity analysis results
C. Application Layer protocol availability analysis results
D. Layer 4 protocol availability analysis results
Question # 23
What 802.11 network configuration would result in multiple stations broadcasting Beacon frames with the same BSSID but with different source addresses?
A. Multiple APs have been loaded with the same configuration from an image file.
B. A single AP supports multiple BSSs with different SSIDs.
C. An IBSS is used instead of a BSS.
D. An SCA network is in use.
Question # 24
You manage a WLAN with 100 802.11ac access points. All access points are configured to use 80 MHz channels. In a particular BSS, only 40 MHz communications are seen. What is the likely cause of this behavior?
A. All clients implement single spatial stream radios
B. The clients are all 802.11n STAs or lower
C. The AP is improperly configured to use only 40 MHz of the 80 MHz allocated bandwidth
D. The short guard interval is also enabled
