• support@dumpspool.com

SPECIAL LIMITED TIME DISCOUNT OFFER. USE DISCOUNT CODE TO GET 20% OFF DP2021

PDF Only

Dumpspool PDF book

$35.00 Free Updates Upto 90 Days

  • 300-430 Dumps PDF
  • 216 Questions
  • Updated On October 10, 2024

PDF + Test Engine

Dumpspool PDF and Test Engine book

$55.00 Free Updates Upto 90 Days

  • 300-430 Question Answers
  • 216 Questions
  • Updated On October 10, 2024

Test Engine

Dumpspool Test Engine book

$45.00 Free Updates Upto 90 Days

  • 300-430 Practice Questions
  • 216 Questions
  • Updated On October 10, 2024
Check Our Free Cisco 300-430 Online Test Engine Demo.

How to pass Cisco 300-430 exam with the help of dumps?

DumpsPool provides you the finest quality resources you’ve been looking for to no avail. So, it's due time you stop stressing and get ready for the exam. Our Online Test Engine provides you with the guidance you need to pass the certification exam. We guarantee top-grade results because we know we’ve covered each topic in a precise and understandable manner. Our expert team prepared the latest Cisco 300-430 Dumps to satisfy your need for training. Plus, they are in two different formats: Dumps PDF and Online Test Engine.

How Do I Know Cisco 300-430 Dumps are Worth it?

Did we mention our latest 300-430 Dumps PDF is also available as Online Test Engine? And that’s just the point where things start to take root. Of all the amazing features you are offered here at DumpsPool, the money-back guarantee has to be the best one. Now that you know you don’t have to worry about the payments. Let us explore all other reasons you would want to buy from us. Other than affordable Real Exam Dumps, you are offered three-month free updates.

You can easily scroll through our large catalog of certification exams. And, pick any exam to start your training. That’s right, DumpsPool isn’t limited to just Cisco Exams. We trust our customers need the support of an authentic and reliable resource. So, we made sure there is never any outdated content in our study resources. Our expert team makes sure everything is up to the mark by keeping an eye on every single update. Our main concern and focus are that you understand the real exam format. So, you can pass the exam in an easier way!

IT Students Are Using our Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI) Dumps Worldwide!

It is a well-established fact that certification exams can’t be conquered without some help from experts. The point of using Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI) Practice Question Answers is exactly that. You are constantly surrounded by IT experts who’ve been through you are about to and know better. The 24/7 customer service of DumpsPool ensures you are in touch with these experts whenever needed. Our 100% success rate and validity around the world, make us the most trusted resource candidates use. The updated Dumps PDF helps you pass the exam on the first attempt. And, with the money-back guarantee, you feel safe buying from us. You can claim your return on not passing the exam.

How to Get 300-430 Real Exam Dumps?

Getting access to the real exam dumps is as easy as pressing a button, literally! There are various resources available online, but the majority of them sell scams or copied content. So, if you are going to attempt the 300-430 exam, you need to be sure you are buying the right kind of Dumps. All the Dumps PDF available on DumpsPool are as unique and the latest as they can be. Plus, our Practice Question Answers are tested and approved by professionals. Making it the top authentic resource available on the internet. Our expert has made sure the Online Test Engine is free from outdated & fake content, repeated questions, and false plus indefinite information, etc. We make every penny count, and you leave our platform fully satisfied!

Frequently Asked Questions

Cisco 300-430 Sample Question Answers

Question # 1

Which customizable security report on Cisco Prime Infrastructure will show rogue APsdetected since a point in time?

A. Network Summary
B. Rogue APs Events
C. New Rogue APs
D. Rogue APs Count Summary

Question # 2

An engineer is implementing Cisco Identity-Based Networking on a Cisco AireOScontroller. The engineer has two ACLs on the controller. The first ACL, named BASE_ACL,is applied to the corporate_clients interface on the WLC, which is used for all corporateclients. The second ACL, named HR_ACL, is referenced by ISE in the Human Resourcesgroup policy. What is the resulting ACL when a Human Resources user connects?

A. HR_ACL appended with BASE_ACL
B. HR_ACL only
C. BASE_ACL appended with HR_ACL
D. BASE_ACL only

Question # 3

Refer to the exhibit. A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectlyprofiled and are assigned as unknown profiled endpoints. Which action efficiently rectifiesthe issue according to Cisco recommendations?

A. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISEconfiguration must be fixed.
B. Disable DHCP proxy on the Cisco WLC.
C. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command underthe VLAN interface to point to DHCP and the two ISE servers.
D. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under theVLAN interface to point to the two ISE servers.

Question # 4

A network engineer wants to implement QoS across the network that support multipleVLANs. All the Aps are connected to switch ports and are configured in local mode. Whichtrust model must be configured on the switch ports to which the Aps are connected?

A. CoS
B. IPP
C. WMM UP
D. DSCP

Question # 5

An engineer is setting up a WLAN to work with a Cisco ISE as the AAA server. Thecompany policy requires that all users be denied access to any resources until they passthe validation. Which component must be configured to achieve this stipulation?

A. AAA override
B. preauthentication ACL
C. WPA2 passkey
D. CPU ACL

Question # 6

An engineer is implementing Cisco Identity-Based Networking on a Cisco AireOScontroller. The engineer has two ACLs on the controller. The first ACL, named BASE_ACL,is applied to the corporate_clients interface on the WLC, which is used for all corporateclients. The second ACL, named HR_ACL, is referenced by ISE in the Human Resourcesgroup policy. What is the resulting ACL when a Human Resources user connects?

A. HR_ACL appended with BASE_ACL
B. HR_ACL only
C. BASE_ACL appended with HR_ACL
D. BASE_ACL only

Question # 7

Which two events are outcomes of a successful RF jamming attack? (Choose two.) 

A. disruption of WLAN services  
B. unauthentication association  
C. deauthentication broadcast  
D. deauthentication multicast  
E. physical damage to AP hardware  

Question # 8

What are two considerations when deploying a Cisco Hyperlocation? (Choose two.)

A. NTP configuration is available, but not recommended.
B. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
C. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LANcontroller must be restarted.
D. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller andCisco CMX.
E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocationdeployments.

Question # 9

A corporation has recently implemented a BYOD policy at their HQ. Which two risks shouldthe security director be concerned about? (Choose two.)

A. network analyzers
B. malware
C. lost and stolen devices
D. keyloggers
E. unauthorized users

Question # 10

What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800Series Wireless Controller?

A. EAP-PEAP with 802.1x port authentication
B. EAP-TLS with 802.1x port authentication
C. EAP-FAST with CAPWAP DTLS + port authentication
D. EAP-FAST with CAPWAP DTLS

Question # 11

When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to aFlexConnect group named BranchA-FCG?

A. config flexconnect BranchA-FCG vlan 30 add
B. config flexconnect group BranchA-FCG vlan add 30
C. config flexconnect group BranchA-FCG vlan 30 add
D. config flexconnect BranchA-FCG vlan add 30

Question # 12

An engineer just added anew MSE to Cisco Prime Infrastructure and wants to synchronize the MSE with the Cisco 5520 WLC, which is located behind a firewall in a DMZ. It is noticed that NMSP messages are failing between the two devices. Which traffic must be allowed on the firewall to ensure that the MSE and WLC can communicate using NMSP?

A. TCP 1613
B. UDP 16113
C. TCP 16113
D. UDP 1613

Question # 13

A Cisco WLC has been added to the network and Cisco ISE as a network device, butauthentication is failing.Which configuration within the network device configuration should be verified?

A. SNMP RO community
B. device interface credentials
C. device ID
D. shared secret

Question # 14

An engineer must implement intrusion protection the WLAN. The AP coverage is adequateand on-channel attacks are the primary concern. The building is historic, which makesadding APs difficult. Which Ap mode and submode must be implemented?

A. Ap mode: local, Ap submode: WIPS
B. Ap mode: monitor, Ap submode: WIPS
C. Ap mode: monitor, Ap submode: none
D. Ap mode: local, Ap submode: none

Question # 15

An engineer wants to configure WebEx to adjust the precedence and override the QoSprofile on the WLAN.Which configuration is needed to complete this task?

A. Change the WLAN reserved bandwidth for WebEx
B. Create an AVC profile for WebEx
C. Create an ACL for WebEx
D. Change the AVC application WebEx-app-sharing to mark 

Question # 16

An engineer must configure Cisco OEAPs for three executives. As soon as the NATaddress is configured on the management interface, it is noticed that the WLC is notresponding for APs that are trying to associate to the internal IP management address.Which command should be used to reconcile this?

A. config flexconnect office-extend nat-ip-only disable
B. config network ap-discovery nap-ip-only enable
C config flexconnect office-extend nat-ip-only enable
D. config network ap-discovery nat-ip-only disable

Question # 17

A customer wants to Aps in the CEO’s office to have different usernames and passwords for administrative support than the other APs deployed through the facility. Which feature must be enabled on the WLC and Aps to achieve this goal?

A. Override global credentials
B. 802.1X supplicant credentials
C. Local management users
D. HTTPS access

Question # 18

An engineer must achieve the highest level of location accuracy possible for a new mobileapplication. Which technology must be implemented for this use case?

A. Time Difference of Arrival
B. Bluetooth Low Energy
C. RSS lateration
D. ToA lateration

Question # 19

An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtendAPs. Which two Layer 2 security options are supported in this environment? (Choose two.)

A. Static WEP + 802.1X
B. WPA+WPA2
C. Static WEP
D. CKIP
E. 802.1X

Question # 20

What is the difference between PIM sparse mode and PIM dense mode?

A. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
B. Sparse mode floods. Dense mode uses distribution trees.
C. Sparse mode uses distribution trees. Dense mode floods.
D. Sparse mode supports multiswitch networks. Dense mode supports only one switch.

Question # 21

An engineer set up identity-based networking with ISE and configured AAA override on theWLAN. Which two attributes must be used to change the client behavior from the defaultsettings? (Choose two.)

A. DHCP timeout
B. IPv6 ACL
C. multicast address
D. DNS server
E. DSCP value

Question # 22

An engineer needs to configure an autonomous AP for 802.Ix authentication. To achievethe highest security an authentication server is used for user authentication During testing,the AP fails to pass the user authentication request to the authentication server. Which twodetails need to be configured on the AP to allow communicator! between the server and theAP? (Choose two.)

A. RADIUS IP address
B. Username and password
C. Group name
D. Shared secret
E. PAC encryption key

Question # 23

An engineer must implement rogue containment for an SSID. What is the maximumnumber of APs that should be used for containment?

A. 1
B. 2
C. 3
D. 4

Question # 24

An engineer wants the wireless voice traffic class of service to be used to determine thequeue order for packets received, and then have the differentiated services code point setto match when it is resent to another port on the switch. Which configuration is required inthe network?

A. Platinum QoS configured on the WLAN
B. WMM set to required on the WLAN
C. mls qos trust dscp configured on the controller switch port
D. mls qos trust cos configured on the controller switch port

Question # 25

Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controllerweb interface?

A. Policy Profile
B. AP Join Profile 
C. Flex Profile  
D. RF Profile  

Question # 26

A wireless engineer must implement a corporate wireless network for a large company inthe most efficient way possible. The wireless network must support 32 VLANs for 300employees in different departments. Which solution must the engineer choose?

A. Configure a second WLC to support half of the APs in the deployment.
B. Configure one single SSID and implement Cisco ISE for VLAN assignment according todifferent user roles.
C. Configure different AP groups to support different VLANs, so that all of the WLANs canbe broadcast on both radios.
D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to bebroadcast on the 5.0-GHz band.

Question # 27

An enterprise started using WebEx as a virtual meeting solution. There is a concern thatthe existing wireless network will not be able to support the increased amount of traffic as aresult of using WebEx. An engineering needs to remark the QoS value for this applicationto ensure high quality in meetings. Which must be implemented to accomplish this task?

A. WLAN quality of service profile
B. QoS preferred call index
C. AVC profiles
D. UP to DSCP map

Question # 28

An engineer must implement Cisco Identity-Based Networking Services at a remote siteusing ISE to dynamically assign groups of users to specific IP subnets. If the subnetassigned to a client is available at the remote site, then traffic must be offloaded locally,and subnets are unavailable at the remote site must be tunneled back to the WLC. Whichfeature meets these requirements?

A. learn client IP address
B. FlexConnect local authentication
C. VLAN-based central switching
D. central DHCP processing

Question # 29

All APs are receiving multicast traffic, instead of only the APs that need it. What is thecause of this problem?

A. The multicast group includes all APs
B. The wrong multicast address was used
C. The multicast group is assigned the wrong VLAN
D. Multicast IGMP snooping is not enabled

Question # 30

Which feature on the Cisco Wireless LAN Controller must be present to support dynamicVLAN mapping?

A. FlexConnect ACL
B. VLAN name override
C. CCKM/OKC
D. AAA override

Question # 31

An IT team is growing quickly and needs a solution for management device access. Thesolution must authenticate users from an external repository instead of the current local onthe WLC, and it must also identify the user and determine what level of access usersshould have. Which protocol do you recommend to achieve these goals?

A. network policy server
B. RADIUS
C. TACACS+
D. LDAP

Question # 32

During the EAP process and specifically related to the client authentication session, whichencrypted key is sent from the RADIUS server to the access point?

A. WPA key
B. session key
C. encryption key
D. shared-secret key

Question # 33

An engineer has successfully implemented 10 active RFID tags in an office environment.The tags are not visible when the location accuracy is tested on the Cisco CMX Detect andLocate window. Which setting on Cisco CMX allows the engineer to view the tags?

A. Enable hyper location services for RFID.
B. Enable RFID tags in tracking options
C. Enable probing clients for active tags.
D. Define an RFID group globally and add the tags.

Question # 34

Which configured is applied to prevent the network from a Layer 2 flooding of multicastframes with a seamless transfer of multicast data to the client when roaming from onecontroller to another?

A. Enable IGMPv3 on the central Layer 3 switch.
B. Enable IGMP snooping on the WLC
C. Enable multicast mode on the WLC
D. Create multicast groups on the central Layer 3 switch.

Question # 35

Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)

A. Synchronize access points with the MSE.
B. Add the MSE to Cisco Prime Infrastructure using the CLI credentials.  
C. Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up. 
D. Apply a valid license for Wireless Intrusion Prevention System.  
E. Apply a valid license for location tracking.  

Question # 36

An engineer is implementing RADIUS to restrict administrative control to the network withthe WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24.Which entry does the engineer define in the RADIUS server?

A. NAS entry of the virtual interface and the network range 192 168 2 0/255 255 255 0
B. shared secret defined on the WLC and the network range 192 168 1 0/255 255 254.0
C. WLC roles for commands and the network range 192 168 1 0/255 255 255.0

Question # 37

Branch wireless users report that they can no longer access services from head office butcan access services locally at the site. New wireless users can associate to the wirelesswhile the WAN is down. Which three elements (Cisco FlexConnect state, operation mode,and authentication method) are seen in this scenario? (Choose three.)

A. authentication-local/switch-local
B. WPA2 personal
C. authentication-central/switch-central
D. lightweight mode
E. standalone mode
F. WEB authentication

Question # 38

Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?

A. 1800s
B. 3600e
C. 3800s
D. 4800i

Question # 39

A customer wants to allow employees to easily onboard their personal devices to thewireless network. The visitors also must be able to connect to the same network withoutthe need to engage with anyone from the reception desk. Which process must beconfigured on Cisco ISE to support this requirement?

A. MAC authentication bypass
B. native supplicant provisioning
C. local web auth
D. self-registration guest portal

Question # 40

A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?

A. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.  
B. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned. 
C. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect. 
D. Configure QoS on the mobile devices that have Jabber installed.  

Question # 41

A company is collecting the requirements for an on-premises event. During the event, awireless client connected to a dedicated WLAN will run a video application that will need toaverage 300000000 bits per second to function properly. What is the QoS marketing thatneeds to be applied to that WLAN?

A. Bronze
B. Platinum
C. Silver
D. Gold

Question # 42

A user is trying to connect to a wireless network that is configured for WPA2-Enterprisesecurity using a corporate laptop. The CA certificate for the authentication server has beeninstalled on the Trusted Root Certification Authorities store on the laptop. The user hasbeen prompted to enter the credentials multiple times, but the authentication has notsucceeded. What is causing the issue?

A. There is an IEEE invalid 802.1X authentication policy on the authentication server.
B. The user Active Directory account is locked out after several failed attempts.
C. There is an invalid 802.1X authentication policy on the authenticator.
D. The laptop has not received a valid IP address from the wireless controller.

Question # 43

Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?

A. RF Profile
B. Flex Profile
C. Policy Profile
D. AP Join Profile

What our clients say about 300-430 Exam Materials

Leave a comment

Your email address will not be published. Required fields are marked *

Rating / Feedback About This Exam