PDF Only
$35.00 Free Updates Upto 90 Days
- 300-420 Dumps PDF
- 242 Questions
- Updated On May 13, 2024
PDF + Test Engine
$55.00 Free Updates Upto 90 Days
- 300-420 Question Answers
- 242 Questions
- Updated On May 13, 2024
Test Engine
$45.00 Free Updates Upto 90 Days
- 300-420 Practice Questions
- 242 Questions
- Updated On May 13, 2024
How to pass Cisco 300-420 exam with the help of dumps?
DumpsPool provides you the finest quality resources you’ve been looking for to no avail. So, it's due time you stop stressing and get ready for the exam. Our Online Test Engine provides you with the guidance you need to pass the certification exam. We guarantee top-grade results because we know we’ve covered each topic in a precise and understandable manner. Our expert team prepared the latest Cisco 300-420 Dumps to satisfy your need for training. Plus, they are in two different formats: Dumps PDF and Online Test Engine.
How Do I Know Cisco 300-420 Dumps are Worth it?
Did we mention our latest 300-420 Dumps PDF is also available as Online Test Engine? And that’s just the point where things start to take root. Of all the amazing features you are offered here at DumpsPool, the money-back guarantee has to be the best one. Now that you know you don’t have to worry about the payments. Let us explore all other reasons you would want to buy from us. Other than affordable Real Exam Dumps, you are offered three-month free updates.
You can easily scroll through our large catalog of certification exams. And, pick any exam to start your training. That’s right, DumpsPool isn’t limited to just Cisco Exams. We trust our customers need the support of an authentic and reliable resource. So, we made sure there is never any outdated content in our study resources. Our expert team makes sure everything is up to the mark by keeping an eye on every single update. Our main concern and focus are that you understand the real exam format. So, you can pass the exam in an easier way!
IT Students Are Using our Designing Cisco Enterprise Networks (ENSLD) Dumps Worldwide!
It is a well-established fact that certification exams can’t be conquered without some help from experts. The point of using Designing Cisco Enterprise Networks (ENSLD) Practice Question Answers is exactly that. You are constantly surrounded by IT experts who’ve been through you are about to and know better. The 24/7 customer service of DumpsPool ensures you are in touch with these experts whenever needed. Our 100% success rate and validity around the world, make us the most trusted resource candidates use. The updated Dumps PDF helps you pass the exam on the first attempt. And, with the money-back guarantee, you feel safe buying from us. You can claim your return on not passing the exam.
How to Get 300-420 Real Exam Dumps?
Getting access to the real exam dumps is as easy as pressing a button, literally! There are various resources available online, but the majority of them sell scams or copied content. So, if you are going to attempt the 300-420 exam, you need to be sure you are buying the right kind of Dumps. All the Dumps PDF available on DumpsPool are as unique and the latest as they can be. Plus, our Practice Question Answers are tested and approved by professionals. Making it the top authentic resource available on the internet. Our expert has made sure the Online Test Engine is free from outdated & fake content, repeated questions, and false plus indefinite information, etc. We make every penny count, and you leave our platform fully satisfied!
Question # 1
An organization is designing a detailed QoS plan that limits bandwidth to specific rates. Which two parameters are supported be the traffic policing feature? (Choose two.)
A. violating
B. marking
C. shaping
D. bursting
E. conforming
Question # 2
In an SD-WAN architecture, which methods are used to bootstrap a vEdge router?
A. DHCP options or manual configuration
B. vManage or DNS records
C. ZTP or manual configuration
D. DNS records or DHCP options
Question # 3
A company is using OSPF between its HQ location and a branch office. HQ is assigned area 0 and the branch office is assigned area 1. The company purchases a second branch office, but due to circuit delays to HQ, it decides to connect the new branch office to the creating branch office as a temporary measure. The new branch office is assigned area 2. Which OSPF configuration enables all three locations to exchange routes?
A. The existing branch office must be configured as a stub area
B. A virtual link must be configured between the new branch office and HQ
C. A sham link must be configured between the new branch office and HQ
D. The new branch office must be configured as a stub area
Question # 4
Which feature is used to optimize WAN bandwidth of IGMP network traffic among WAN Edge routers in the same VPN?
A. IGMPv2
B. multicast RP
C. multicast-replicator
D. multicast service routes
Question # 5
Drag and drop the characteristics from the left onto the correct telemetry mode on the right.
Question # 6
Refer to the exhibit. An architect must design an IP addressing scheme for a multisite network connected via a WAN transit. The campus site must accommodate 12,000 devices and the branch sites must accommodate 1,000 devices. Which address scheme optimizes network device resources, contains convergence events to the different blocks of the network, and ensures future growth of the network?• Campus: 10.0.0.0/18Branch1: 10.0.192.0/21Branch2: 10.0.200.0/21• Campus: 10.0.0.0/16Branchi: 10.255.0.0/20Branch2: 10.255.16.0/20• Campus: 10.0.0.0/10Branch1: 10.64.0.0/10Branch2: 10.128.0.0/10• Campus: 10.0.0.0/20
A. Branch1: 10.0.64.0/21
B. Branch2: 10.0.128.0/21
Question # 7
Refer to the exhibit. Area 10 is a regular OSPF area and networks 10.1.1.0/24 and 172.16.1.0/24 are internal. Which design provides optimal routing between both networks when the link between routers C and E fails?
A. Move the link between routers C and D to area 10.
B. Create an OSPF virtual link between routers E and F.
C. Create a tunnel between routers E and F in area 10.
D. Make area 10 a not-so-stubby area.
Question # 8
A network engineer is redesigning a company's QoS solution. The company is currently using IP Precedence, but the engineer plans to move to DiffServ. It is important that the new solution provide backward compatibility with the current solution. Which technology should the design include?
A. expedited forwarding
B. assured forwarding
C. class selector code points
D. default per hop behavior
Question # 9
What are two valid scaling techniques when an EIGRP network is designed that consists of more than 1000 routers? (Choose two.)
A. Use structured hierarchical topology with route summarization
B. Used sub-second timers
C. Use the distribute-list command to filter routes
D. Modify delay parameters on the links
E. Implement multiple EIGRP autonomous systems
Question # 10
Refer to the exhibit. An architect reviews the low-level design of a company's enterprise network and advises optimizing the STP convergence time. Which functionality must be to Gi1/0/1-10 to follow the architect's recommendation?
A. PortFast
B. root guard
C. UplinkFast
D. BPDU guard
Question # 11
Which solution allows overlay VNs to communicate with each other in an SD-WAN Architecture?
A. External fusion routers can be used to map VNs to VRFs and selectively route traffic between VRFs.
B. GRE tunneling can be configured between fabric edges to connect one VN to another.
C. SGTs can be used to permit traffic from one VN to another.
D. Route leaking can be used on the fabric border nodes to inject routes from one VN to another.
Question # 12
An engineer is designing a Layer 3 campus network running EIGRP between the core, aggregation, and access layers. The access layer switches will be connected to the aggregation layer using Layer 3 copper connections. The engineer wants to improve convergence time for access layer switch failures. Which technique must the design include?
A. enabling BFD for EIGRP on the access layer uplinks
B. reducing the EIGRP Hello / Hold timer values
C. EIGRP summarization from core to aggregation layer
D. EIGRP summarization from access to aggregation layer
Question # 13
An engineer is upgrading a company’s main site to include a connection to a second ISP. The company will receive full Internet routing tables from both ISPs via BGP. The engineer must ensure that the company does not become a transit autonomous system. Which solution should be included in this design?
A. Tag incoming routes from both ISPs with BGP community no-export.
B. Lower the MED for updates sent to the secondary ISP.
C. Use a route-map to prevent all prefixes from being advertised to either ISP.
D. Modify the local-preference for routes incoming from the primary ISP.
Question # 14
Which two steps can be taken to improve convergence in an OSPF network? (Choose two.)
A. Use Bidirectional Forwarding Detection
B. Merge all the areas into one backbone area
C. Tune OSPF parameters
D. Make all non-backbone areas stub areas
E. Span the same IP network across multiple areas.
Question # 15
Refer to the exhibit.EIGRP has been configured on all links. The spoke nodes have been configured as EIGRP stubs, and the WAN links to R3 have higher bandwidth and lower delay than the links to R4. When a link failure occurs at the R1-R2 link, what happens to traffic on R1 that is destined for a subnet attached to R2?
A. R1 has no route to R2 and drops the traffic
B. R1 load-balances across the paths through R3 and R4 to reach R2
C. R1 forwards the traffic to R3, but R3 drops the traffic
D. R1 forwards the traffic to R3 in order to reach R2
Question # 16
Company A recently acquired another company. Users of the newly acquired company must be able to access a server that exists on Company A’s network, both companies use overlapping IP address ranges. Which action conserves IP address space and provides access to the server?
A. Use a single IP address to create overload NAT
B. Use a single IP address to create a static NAT entry
C. Build one-to-one NAT translation for every user that needs access
D. Re-IP overlapping address space in the acquired company
Question # 17
Which design consideration must be made when dual WAN Edge routers are deployed at a branch site?
A. Use BGP AS-path prepending to influence egress traffic and use MED to influence ingress traffic from the branch.
B. HSRP priorities must match the OMP routing policy to prefer one WAN Edge over the other.
C. Traffic must be symmetrical as it egresses the WAN Edges and returns from remote sites for DPI to function properly.
D. Configure BFD between WAN Edge routers to detect sub-second link failures.
Question # 18
A global organization with several branches hired a network architect to design an overlay VPN solution. The branches communicate with each other frequently. The customer expects to add more branches in the future. To meet the customer's security requirements, the architect plans to provide traffic protection using dynamic IPsec tunnels. Which solution should the architect choose?
A. DMVPN
B. EasyVPN
C. GETVPN
D. L2TP
Question # 19
How is end-to-end microsegmentation enforced in a Cisco SD-Access architecture?
A. VLANs are used to segment traffic at Layer 2.
B. 5-tuples and ACLs are used to permit or deny traffic.
C. SGTs and SGTACLs are used to control access to various resources.
D. VRFs are used to segment traffic at Layer 3.
Question # 20
Drag and drop the characteristics from the left onto the configuration protocols they describe on the right.
Question # 21
Refer to the exhibit.An engineer must design a WAN solution so that ISP-1 is always preferred over ISP-2. The path via ISP-2 is considered as a backup and must be used only when the path to ISP-1 is down. Which solution must the engineer choose?
A. R1:- Routes advertised to ISP-1: 0x AS-path prepend- Routes received from ISP-1: HIGH local-preference- Routes advertised to R2: no action- Routes received from R2: community NO-EXPORTR2:- Routes advertised to ISP-2:5x AS-path prepend- Routes received from ISP-2: LOW local-preference- Routes advertised to R1: community NO-ADVERTISE- Routes received from R1: no action
B. R1:- Routes advertised to ISP-1: 0x AS-path prepend- Routes received from ISP-1: HIGH local-preference- Routes advertised to R2: community NO-EXPORT- Routes received from R2: no actionR2:- Routes advertised to ISP-2: 5x AS-path prepend- Routes received from ISP-2: LOW local-preference- Routes advertised to R1: no action- Routes received from R1: no action
C. R1:- Routes advertised to ISP-1: 0x AS-path prepend- Routes received from ISP-1: LOW local-preference- Routes advertised to R2: community NO-ADVERTISE- Routes received from R2: no actionR2:- Routes advertised to ISP-2: 5x AS-path prepend- Routes received from ISP-2: HIGH local-preference- Routes advertised to R1: no action- Routes received from R1: community NO-ADVERTISE
D. R1:- Routes advertised to ISP-1: 5x AS-path prepend- Routes received from ISP-1: LOW local-preference- Routes advertised to R2: community NO-ADVERTISE- Routes received from R2: no actionR2:- Routes advertised to ISP-2: 0x AS-path prepend- Routes received from ISP-2: HIGH local-preference- Routes advertised to R1: community NO-EXPORT- Routes received from R1: no action
Question # 22
Which two functions does the control plane node provide in a Cisco SD-Access architecture? (Choose two.)
A. LISP proxy ETR
B. host tracking database
C. policy mapping
D. map server
E. endpoint registration
Question # 23
Refer to the exhibit. The distribution switches serve as the layer 3 boundary. HSRP preemption is enabled. When the primary switch comes back after a failure, traffic is initially dropped. Which solution must be implemented to improve the design?
A. Increase the hello timers on both HSRP devices
B. Use the preempt delay feature on the primary HSRP device.
C. Use the preempt delay feature on the backup HSRP device
D. Configure a higher mac-refresh interval on both HSRP device
Question # 24
Drag and drop the descriptions from the left onto the corresponding VPN types on the rights.
Question # 25
An engineer must design a QoS solution for a customer that is connected to an ISP over a 1Gbps link with a 100Mbps CIR. The ISP aggressively drops all traffic received over which is causing numerous TCP retransmissions. The customer is not using any RTP applications but wants to maximize bandwidth usage up to the CIR. Which QoS solution engineer choose?
A. Policing
B. Traffic shaping
C. Policer with markdown
D. Queuing
Question # 26
What is an advantage of designing an out-of-band network management solution?
A. In the event of a production network outage, network devices can still be managed.
B. There is no separation between the production network and the management network.
C. In the event of a production network outage, it can be used as a backup network path.
D. It is less expensive than an in-band management solution
Question # 27
Drag and drop the description from the left onto the corresponding WAN connectivity types and categories on the right.
Question # 28
At which layer does Cisco Express Forwarding use adjacency tables to populate addressing information?
A. Layer4
B. Layer 2
C. Layer 1
D. Layer 3
Question # 29
An existing network solution is using BFD in echo mode. Several of the network devices are experiencing high CPU utilization which an engineer has determined is related to the BFD feature. Which solution should the engineer leverage to reduce the CPU load?
A. Implement slow timers between peers with low CPU resources.
B. Implement BED asynchronous mode between peers with low CPU resources.
C. Enable BFD multi-hop on the devices with low CPU resources.
D. Utilize carrier delay on all routers in the network.
Question # 30
Refer to the exhibit. All routers currently reside in OSPF area 0. The network manager recently used R1 and R2 as aggregation routers for remote branch locations and R3 and R4 for aggregation routers for remote office locations. The network has since been suffering from outages, which are causing frequent SPF runs. To enhance stability and introduce areas to the OSPF network with the minimal number of ABRs possible, which two solutions should the network manager recommend? (Choose two.)
A. a new OSPF area for R1 and R2 connections,with R1 and R2as ABRs
B. a new OSPF area for R3 and R4 connections,with R5 and R6as ABRs
C. a new OSPF area for R3 and R4 connections,with R3 and R4as ABRs
D. a new OSPF area for R1, R2, R3, and R4 connections, with R1, R2, R3, and R4 as ABRs
E. a new OSPF area for R1 and R2 connections, with R5 and R6 as ABRs
Question # 31
Drag and drop the characteristics from the left onto the telemetry mode they apply to on the right.
Question # 32
A branch office has a primary L3VPN MPLS connection back to the main office and an IPSEC VPN tunnel that serves as backup. Which design ensures that data is sent over the backup connection only if the primary MPLS circuit is down?
A. Use EIGRP to establish a neighbor relationship with the main office via
B. L3VPN MPLS and the IPSEC VPN tunnel.
C. Use BGP with the multipath feature enabled to force traffic via the primary path when available.
D. Use static routes tied to an IP SLA to prefer the primary path while a floating static route points to the backup connection.
E. Use OSPF with a passive-interface command on the backup connection.
Question # 33
When designing interdomain multicast, which two protocols are deployed to achieve communication between multicast sources and receivers? (Choose two.)
A. IGMPv2
B. BIDIR-PIM
C. MP-BGP
D. MSDP
E. MLD
Question # 34
An architect must develop a campus network solution that includes: logically segmented and isolated networks ability to communicate between network segments when required support for overlapping IP addresses widely available technologies to avoid purchasing specialized equipment Which solution must the architect select?
A. VSS with IGP
B. 802.1Q with HSRP
C. vPC with HSRP
D. VRF-Lite with OSPF
Question # 35
An engineer is designing an EIGRP network for a small branch site where there is only one Layer 3 router. The engineer wants the router to advertise the local LAN network to remote EIGRP neighbors without sending any unnecessary multicast messages on the local LAN. Which action should the engineer take?
A. Use a static default route for this site instead of EIGRP
B. Advertise the local LAN using the network command and the passive-interface feature
C. Redistribute the local LAN network using the redistribute connected command
D. Advertise the local LAN subnet as a stub network
Question # 36
An engineer is designing an EIGRP network for a small branch site where there is only one Layer 3 router. The engineer wants the router to advertise the local LAN network to remote EIGRP neighbors without sending any unnecessary multicast messages on the local LAN. Which action should the engineer take?
A. Use a static default route for this site instead of EIGRP
B. Advertise the local LAN using the network command and the passive-interface feature
C. Redistribute the local LAN network using the redistribute connected command
D. Advertise the local LAN subnet as a stub network
Question # 37
An enterprise customer has these requirements:end-to-end QoS for the business-critical applications and VoIP services based on CoS marking.flexibility to offer services such as IPv6 and multicast without any reliance on the service provider.support for full-mesh connectivity at Layer 2.Which WAN connectivity option meets these requirements?
A. VPWS
B. MPLS VPN
C. DMVPN
D. VPLS
Question # 38
An engineer must design a QoS solution for a customer. The network currently supports data only, but the customer will roll out VoIP and IP video in conjunction with the new QoS solution. The engineer plans to use DiffServ. To ensure priority for voice services, which model must the design include?
A. 8-class model
B. 4-class model
C. 6-class model
D. 12-class model
Question # 39
Which component is part of the Cisco SD-Access overlay architecture?
A. border node
B. spine node
C. leaf node
D. Cisco DNA Center
Question # 40
Which type of rendezvous point deployment is standards-based and supports dynamic RP discovery?
A. bootstrap router
B. Anycast-RP
C. Auto-RP
D. static RP
Question # 41
A network solution is being designed for a company that connects to multiple Internet service providers. Which Cisco proprietary BGP path attribute will influence outbound traffic flow?
A. Local Preference
B. MED
C. Weight
D. AS Path
E. Community
Question # 42
Drag and drop the elements from the left onto the functions they perform in the Cisco SDWAN architecture on the right.
Question # 43
A router running ISIS is showing high CPU and bandwidth utilization. An engineer discovers that the router is configured as L1/L2 and has L1 and L2 neighbors. Which step optimizes the design to address the issue?
A. Make this router a DIS for each of the interfaces
B. Disable the default behavior of advertising the default route on the L1/L2 router
C. Configure the router to be either L1 or L2
D. Configure each interface as either L1 or L2 circuit type
Question # 44
Which method does Cisco SD-WAN use to avoid fragmentation issues?
A. PMTUD is used.
B. Traffic is marked with the DF bit set.
C. Jumbo frames are enabled.
D. Access circuits are configured with 1600 byte MTU settings.
Question # 45
Refer to the exhibit. An architect must design a solution to connect the two ASs. To optimize bandwidth, the design will implement load sharing between router R6 and router R4. Which solution should the design include?
A. Use update-source to specify the Loopback interface.
B. Use next-hop-serf attributes only for routes that are learned from eBGP peers.
C. Configure the eBGP TTL to support eBGP multihop.
D. Use maximum-paths to install multiple paths in the routing table.
Question # 46
Refer to the exhibit. An architect must design a solution to connect the network behind R3 with the EIGRP network. Which mechanism should be included to avoid routing loops?
A. split-horizon
B. summarization
C. down bit
D. route tags
Question # 47
When IPsec VPNs are designed, what is a unique requirement if support for IP Multicast is required?
A. encapsulation of traffic with GRE or VTI
B. IPsec forwarding using transport mode
C. additional bandwidth for headend
D. IPsec forwarding using tunnel mode
Question # 48
Which NETCONF operation creates filtering that is specific to the session notifications?
A. <create-subscription>
B. <commit>
C. <notification>
D. <logging>
