• support@dumpspool.com
SPECIAL LIMITED TIME DISCOUNT OFFER. USE DISCOUNT CODE TO GET 20% OFF DP2021

PDF Only

$35.00 Free Updates Upto 90 Days

  • 300-410 Dumps PDF
  • 575 Questions
  • Updated On March 25, 2024

PDF + Test Engine

$55.00 Free Updates Upto 90 Days

  • 300-410 Question Answers
  • 575 Questions
  • Updated On March 25, 2024

Test Engine

$45.00 Free Updates Upto 90 Days

  • 300-410 Practice Questions
  • 575 Questions
  • Updated On March 25, 2024
Check Our Free Cisco 300-410 Online Test Engine Demo.

How to pass Cisco 300-410 exam with the help of dumps?

DumpsPool provides you the finest quality resources you’ve been looking for to no avail. So, it's due time you stop stressing and get ready for the exam. Our Online Test Engine provides you with the guidance you need to pass the certification exam. We guarantee top-grade results because we know we’ve covered each topic in a precise and understandable manner. Our expert team prepared the latest Cisco 300-410 Dumps to satisfy your need for training. Plus, they are in two different formats: Dumps PDF and Online Test Engine.

How Do I Know Cisco 300-410 Dumps are Worth it?

Did we mention our latest 300-410 Dumps PDF is also available as Online Test Engine? And that’s just the point where things start to take root. Of all the amazing features you are offered here at DumpsPool, the money-back guarantee has to be the best one. Now that you know you don’t have to worry about the payments. Let us explore all other reasons you would want to buy from us. Other than affordable Real Exam Dumps, you are offered three-month free updates.

You can easily scroll through our large catalog of certification exams. And, pick any exam to start your training. That’s right, DumpsPool isn’t limited to just Cisco Exams. We trust our customers need the support of an authentic and reliable resource. So, we made sure there is never any outdated content in our study resources. Our expert team makes sure everything is up to the mark by keeping an eye on every single update. Our main concern and focus are that you understand the real exam format. So, you can pass the exam in an easier way!

IT Students Are Using our Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) Dumps Worldwide!

It is a well-established fact that certification exams can’t be conquered without some help from experts. The point of using Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) Practice Question Answers is exactly that. You are constantly surrounded by IT experts who’ve been through you are about to and know better. The 24/7 customer service of DumpsPool ensures you are in touch with these experts whenever needed. Our 100% success rate and validity around the world, make us the most trusted resource candidates use. The updated Dumps PDF helps you pass the exam on the first attempt. And, with the money-back guarantee, you feel safe buying from us. You can claim your return on not passing the exam.

How to Get 300-410 Real Exam Dumps?

Getting access to the real exam dumps is as easy as pressing a button, literally! There are various resources available online, but the majority of them sell scams or copied content. So, if you are going to attempt the 300-410 exam, you need to be sure you are buying the right kind of Dumps. All the Dumps PDF available on DumpsPool are as unique and the latest as they can be. Plus, our Practice Question Answers are tested and approved by professionals. Making it the top authentic resource available on the internet. Our expert has made sure the Online Test Engine is free from outdated & fake content, repeated questions, and false plus indefinite information, etc. We make every penny count, and you leave our platform fully satisfied!

Cisco 300-410 Sample Question Answers

Question # 1

A company is expanding business by opening 35 branches over the Internet. A network engineer must configure DMVPN at the branch routers to connect with the hub router and allow NHRP to add spoke routers securely to the multicast NHRP mappings automatically Which configuration meets this requirement at the hub router?

A. Option A
B. Option B
C. Option C
D. Option D 

Question # 2

Refer to the exhibit. The security department recently installed a monitoring device between routers R3 and R5, which a loss of network connectivity for users connected to R5. Troubleshooting revealed that the monitoring device cannot forward multicast packets. The team already updated R5 with the correct configuration. Which configuration must be implemented on R3 to resolve the problem by ensuring R3 as the DR for the R3-R5 segment?

A. Option A
B. Option B
C. Option C
D. Option D 

Question # 3

Refer to the exhibit.While troubleshooting a BGP route reflector configuration, an engineer notices that reflected routes are missing from neighboring routers. Which two BGP configurations are needed to resolve the issue? (Choose two)

A. neighbor 10.1.1.14 route-reflector-client
B. neighbor R2 route-reflector-client
C. neighbor 10.1.1.2 allowas-in
D. neighbor R4 route-reflector-client
E. neighbor 10.1.1.2 route-reflector-client 

Question # 4

Refer to the exhibit. A NOC team receives a ticket that data traffic from RA to RF is not forwarded when the link between the RC-RE path goes down. All routers learn loopback IP through the IGP protocol. Which configuration resolves?

A. RD(config)#router bgp B5201RD(config-router)# neighbor 10.10.10.2 update-source loopback 0
B. RD(config-router)# neighbor bgp 65101RB(config-router)# neighbor 10.10.10.3 ebgp-multihop 3
C. RB(config)# router bgp 65101RB(config)#neighbor 10.10.10.3 update-source loopback 0
D. RD(config)# router bgp 65201RDI(config-router)# neighbor 10.10.10.2 ebgp-multihop 3

Question # 5

Refer to the exhibit The remote branch locations have a static neighbor relationship configured to R1 only R1 has successful neighbor relationships with the remote locations of R2 and R3, but the end users cannot communicate with each other. Which configuration resolves the issue’

A. Option A
B. Option B
C. Option C
D. Option D
E. Option E 

Question # 6

Refer to the exhibit.With the partial configuration of a router-on-a-stick. Clients in VLAN 10 on Gi2 cannot obtain IP configuration from the central DHP server is reachable by a successful ping from the route. Which action resolves the issue?

A. Configure the ip/ip/dhcp pool f and network 192.168..210.0.255.255/0 commands.
B. Configure the ip header-address 192-168.265.3 command on the Gi2 10 subinterface. 
C. Configure a valid IP address on the Gi2 interface so that DHCP requests can be forwarded.
D. Configure the Ip dhcp excluded-address 192.168.255.3 command on the Gi1.10 subinterface.

Question # 7

Drag and drop the descriptions from the left onto the corresponding MPLS components on the right.

Question # 8

The network administrator configured CoPP so that all routing protocol traffic toward the router CPU is limited to 1 mbps. All traffic that exceeds this limit must be dropped. The router is running BGP and OSPF Management traffic for Telnet and SSH must be limited to 500kbps.access-list 100 permit tcp any any eq 179access-list 100 permit tcp any any range 22 23access-list 100 permit ospf any any!class-map CM-ROUTINGmatch access-group 100class-map CM-MGMTmatch access-group 100!policy-map PM-COPPclass CM-ROUTINGpolice 1000000 conform-action transmitclass CM-MGMTpolice 500000 conform-action transmit!control-planeservice-policy output PM-COPPNo traffic is filtering through CoPP,which is resulting in high CPU utilization,which configuration resolves the issue ?

A. no access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit ospf any anyaccess-list 101 Permit tcp any any range 22 23!class-map CM-MGMTno match access-group 100match access-group 101
B. control-planeno service-policy output PM-COPPservice-policy input PM-COPP
C. No access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit tcp any any range eq 22access-list 100 permit tcp any any range eq 23access-list 100 permit ospf any any 
D. no access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit ospf any anyaccess-list 101 Permit tcp any any range 22 23!class-map CM-MGMTno match access-group 100match access-group 101!control-planeno service-policy output PM-COPPservice-policy input PM-COPP 

Question # 9

Refer to the exhibit.An administrator is troubleshooting a time synchronization problem for the router time toanother Cisco IOS XE-based device that has recently undergone hardening. Which actionresolves the issue?

A. Allow NTP in the ingress ACL on 10.1.225.40 by permitting UDP destined to port 123.
B. Ensure that he CPE router has a valid route to 10.1.255. 40 for NTP and rectify if not reachable.
C. NTP service is disabled and must be enabled on 10.1.225.40.
D. Allow NTP in the ingress ACL on 10.1.255.40 by permitting TCP destined to port 123. 

Question # 10

Refer to the exhibit.TCP traffic should be reaching host 10.10.10.10/24 via R2. Which action resolves the issue?

A. TCP traffic will reach the destination via R2 without any changes
B. Add a permit 20 statement in the route map to allow TCP traffic
C. Allow TCP in the access list with no changes to the route map
D. Set IP next-hop to 10.10.12.2 under the route-map permit 10 to allow TCP traffic. 

Question # 11

A network administrator is troubleshooting a high utilization issue on the route processor of a router that was reported by NMS The administrator logged into the router to check the control plane policing and observed that the BGP process is dropping a high number of routing packets and causing thousands of routes to recalculate frequently. Which solution resolves this issue?

A. Police the cir for BGP, conform-action transmit, and exceed action transmit.
B. Shape the pir for BGP, conform-action set-prec-transmit, and exceed action set-frdetransmit.
C. Shape the cir for BGP. conform-action transmit, and exceed action transmit.
D. Police the pir for BGP, conform-action set-prec-transmit, and exceed action set-clptransmit. 

Question # 12

Refer to the exhibit. An engineer must redistribute networks 192.168.10.0/24 and 192.168.20.0/24 into OSPF from EIGRP. where the metric must be added when traversing through multiple hops to start an external route of 20 The engineer notices that the external metric is fixed and does not add at each hop. Which configuration resolves the issue?

A. Option A
B. Option B
C. Option C
D. Option D 

Question # 13

What is a function of BFD?

A. peer recovery after a Layer 3 protocol adjacency failure
B. peer recovery after a Layer 2 adjacency failure
C. failure detection independent of routing protocols and media types
D. failure detection dependent on routing protocols and media types 

Question # 14

Which method provides failure detection in BFD?

A. short duration, high overhead
B. short duration, low overhead
C. long duration, high overhead
D. long duration, low overhead 

Question # 15

Refer to the exhibit.R5 should not receive any routes originated in the EIGRP domain. Which set of configuration changes removes the EIGRP routes from the R5 routing table to fix the issue?

A. R4route-map O2R deny 10match tag 111route-map O2R permit 20!router ripredistribute ospf 1 route-map O2R metric 1
B. R2route-map E20 deny 20R4route-map O2R deny 10 match tag 111!router ripredistribute ospf 1 route-map O2R metric 1
C. R4route-map O2R permit 10match tag 111route-map O2R deny 20!router ripredistribute ospf 1 route-map O2R metric 1
D. R4route-map O2R deny 10match tag 111!router ripredistribute ospf 1 route-map O2R metric 1 

Question # 16

Refer to the exhibit Which command must be configured to make VRF CCNP work?

A. Option A
B. Option B
C. Option C
D. Option D 

Question # 17

Refer to the exhibit.An engineer configured NetFlow on R1, but the NMS server cannot see the flow fromethernet 0/0 of R1. Which configuration resolves the issue?

A. flow monitor Flowmonitor1source Ethernet0/0
B. interface Ethernet0/1ip flow monitor Flowmonitor1 inputip flow monitor Flowmonitor1 output
C. interface Ethernet0/0ip flow monitor Flowmonitor1 inputip flow monitor Flowmonitor1 output
D. flow exporter FlowAnalyzer1source Ethernet0/0 

Question # 18

Refer to the exhibit.A loop occurs between R1, R2, and R3 while EIGRP is run with poison reverse enabled. Which action prevents the loop between R1, R2, and R3?

A. Configure route tagging
B. Enable split horizon
C. Configure R2 as stub receive-only
D. Configure route filtering

Question # 19

Refer to the exhibit.R1 is configured with IP SLA to check the availability of the server behind R6 but it kept failing. Which configuration resolves the issue?

A. R6(config)# ip sla responder
B. R6(config)# ip sla responder udp-echo ip address 10.10.10.1 port 5000
C. R6(config)# ip access-list extended DDOSR6(config ext-nac)# 5 permit icmp host 10.66 66.66 host 10.10.10.1
D. R6(config)# ip access-list extended DDOSR6(confg ext-nac)# 5 permit icmp host 10.10.10.1 host 10.66.66.66 

Question # 20

Refer to the exhibit.An engineer cannot copy the IOS.bin file from the FTP server to the switch. Which action resolves the issue?

A. Allow file permissions to download the file from the FTP server.
B. Add the IOS.bin file, which does not exist on FTP server.
C. Make memory space on the switch flash or USB drive to download the file.
D. Use the copy flash:/ ftp://cisco@10.0.0.2/IOS.bin command. 

Question # 21

Refer to the exhibits. London must reach Rome using a faster path via EIGRP if all the links are up but it failed totake this path Which action resolves the issue?

A. Increase the bandwidth of the link between London and Barcelona
B. Use the network statement on London to inject the 172 16 X 0/24 networks into EIGRP.
C. Change the administrative distance of RIP to 150 
D. Use the network statement on Rome to inject the 172 16 X 0/24 networks into EIGRP 

Question # 22

Refer to the exhibit.The AP status from Cisco DNA Center Assurance Dashboard shows some physical connectivity issues from access switch interface G1/0/14. Which command generates the diagnostic data to resolve the physical connectivity issues?

A. test cable diagnostics tdr interface GigabitEthernet1/0/14
B. Check cable-diagnostics tdr interface GigabitEthernet1/0/14
C. show cable-diagnostics tdr interface GigabitEthernet1/0/14
D. Verify cable-diagnostics tdr interface GigabitEthernet1/0/14 

Question # 23

Refer to the exhibit. 

A. Option A
B. Option B
C. Option C
D. Option D 

Question # 24

Which IPv6 feature enables a device to reject traffic when it is originated from an address that is not stored in the device binding table?

A. IPv6 Snooping
B. IPv6 Source Guard
C. IPv6 DAD Proxy
D. IPv6 RA Guard

Question # 25

Which feature minimizes DoS attacks on an IPv6 network?

A. IPv6 Binding Security Table
B. IPv6 Router Advertisement Guard
C. IPv6 Prefix Guard
D. IPv6 Destination Guard 

Question # 26

A newly installed spoke router is configured for DMVPN with the ip mtu 1400 command. Which configuration allows the spoke to use fragmentation with the maximum negotiated TCP MTU over GRE? 

A. ip tcp adjust-mss 1360 crypto ipsec fragmentation after-encryption 
B. ip tcp adjust-mtu 1360 crypto ipsec fragmentation after-encryption 
C. ip tcp adjust-mss 1360 crypto ipsec fragmentation mtu-discovery 
D. ip tcp adjust-mtu 1360 crypto ipsec fragmentation mtu-discovery 

Question # 27

 Refer to the exhibit. The company implemented uRPF to address an antispoofing attack. A network engineer received a call from the IT security department that the regional data center is under an IP attack Which configuration must be implemented on R1 to resolve this issue? 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 28

Refer to the exhibit. Although summarization is configured for R1 to receive 10.0.0.0/8. more specific routes are received by R1. How should the 10.0.0.0/8 summary route be received from the neighbor, attached to R1 via Fast Ethernet0/0 interface? 

A. R1 should configure the ip summary-address eigrp 10.0.0.0.255.0.0.0 command under the Fast Ethernet 0/0 interface. 
B. The summarization condition is not met Router 10 1 100.10 requires a route for 10 0.0.0/8 that points to null 0 
C. The summarization condition is not met. The network 10.1.100.0/24 should be changed to 172.16.0.0/24. 
D. R1 should configure the ip summary-address eigrp 10.0.0.0 0.0.0.255 command under the Fast Ethernet 0/0 interface. 

Question # 29

Refer to the exhibit. An engineer must establish a point-to-point GRE VPN between R1 and the remote site. Which configuration accomplishes the task for the remote site? 

A. Interface Tunnel1 tunnel source 199.1.1.1 tunnel destination 200.1.1.3 ip address 192.168.1.3 255.255.255.0 
B. Interface Tunnel1 tunnel source 200.1.1.3 tunnel destination 199.1.1.1 ip address 192.168.1.1.255.255.255.0 
C. Interface Tunnel1 tunnel source 200.1.1.3 tunnel destination 199.1.1.1 ip address 192.168.1.3.255.255.255.0
D. Interface Tunnel lunnel source 199.1.1.1 tunnel destination 200.1.1.3 ip address 192.168.1.1.255.255.255.0  

Question # 30

Refer to the exhibit. Which two commands provide the administrator with the information needed to resolve the issue? (Choose two.) 

A. Show snmp user  
B. debug snmp engine-id  
C. debug snmpv3 engine-id  
D. debug snmp packet  
E. showsnmpv3 user  

Question # 31

What are two characteristics of IPv6 Source Guard? (Choose two.) 

A. requires IPv6 snooping on Layer 2 access or trunk ports  
B. used in service provider deployments to protect DDoS attacks  
C. requires the user to configure a static binding  
D. requires that validate prefix be enabled  
E. recovers missing binding table entries  

Question # 32

Refer to the exhibit. A network administrator is troubleshooting IPv6 address assignment for a DHCP client thatis not getting an IPv6 address from the server.Which configuration retrieves the client IPv6 address from the DHCP server?  

A. ipv6 address autoconfig command on the interface  
B. ipv6 dhcp server automatic command on DHCP server  
C. ipv6 dhcp relay-agent command on the interface  
D. service dhcp command on DHCP server  

Question # 33

An engineer configured a router with this configuration ip access-hst DENY TELNET 10 deny tcp any any eq 23 log-inputThe router console starts receiving log message :%SEC-6-IPACCESSLOGP: listDENY_TELNET denied tcp 192.168.1.10(1022)(FastEthernet1/0 D508.89gb.003f) - >192.168.2.20(23), 1 packet" Which action stops messages on the console while still denying Telnet?  

A. Configure a 20 permit ip any any command  
B. Remove log-Input keyword from the access list.  
C. Replace log-input keyword with the log keyword in the access list.  
D. Configure a 20 permit ip any any log-input command.  

Question # 34

 Refer to the exhibit. An engineer is troubleshooting a failed Telnet session from PC to the DHCP server. Which action resolves the issue? 

A. Remove sequence 30 and add it back to the IPv6 traffic filter as sequence 5.  
B. Remove sequence 20 and add it back to the IPv6 traffic filter as sequence 5.  
C. Remove sequence 10 to add the PC source IP address and add it back as sequence 10.  
D. Remove sequence 20 for sequence 40 in the access list to allow Telnet.  

Question # 35

Refer to the exhibit. A network administrator is trying to switch to the privileged EXEC level on R1 but failed. Which configuration resolves the issue? 

A. Enable password Cisco@123  
B. tacass server enable-password Cisco@123  
C. tacacs-server enable-password Cisco@123  
D. enable-password Cisco@123  

Question # 36

Refer to the exhibit. An engineer configured IP SLA on R1 to avoid the ISP link flapping problem. but it is not working as designed IP SLA should wait 30 seconds before switching traffic to a secondary connection and then revert to the primary link after waning 20 seconds, when the primary link is available and stabilized. Which configuration resolves the issue? 

A. R1(config)#ip sla 700 R1(config-ip-sla)#delay down 30 up 20
B. R1(config)#ip sla 700 R1(config-ip-sla)#delay down 20 up 30
C. R1(config)#track 700 ip sla 700 R1(config-track)#delay down 30 up 20
D. R1(config)#track 700 ip sla 700 R1(config-track)#delay down 20 up 30

Question # 37

A. access-list 20 permit 10.221.10.12  
B. snmp-server group NETVIEW v2c priv read NETVIEW access 20  
C. snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 22  
D. access-list 20 permit 10.221.10.11  

Question # 38

  Refer to the exhibit The engineer configured route redistribution in the network but soon received reports that R2 cannot access 192 168 7 0/24 and 192 168 15 0/24 subnets Which configuration resolves the issue? 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 39

Refer to the exhibit. After recovering from a power failure. Ethernet0/1 stayed down while Ethernet0/0 returned to the up/up state The default route through ISP1 was not reinstated m the routing table until Ethernet0/1 also came up Which action resolves the issue? 

A. Reference the track object 1 in both static default routes  
B. Remove the references to the interface names from both static default routes  
C. Configure the default route through ISP1 with a higher administrative distance than 2.  
D. Add a static route to the 8 8.8 8/32 destination through the next hop 203.0.113.1  

Question # 40

Refer to the exhibit. Packets arriving from source 209.165.200.215 must be sent with the precedence bit set to 1, and packets arriving from source 209.165.200.216 must be sent with the precedence bit set to 5. Which action resolves the issue? 

A. set ip precedence critical in route-map Texas permit 10  
B. set ip precedence critical in route-map Texas permit 20  
C. set ip precedence immediate in route-map Texas permit 10  
D. set ip precedence priority in route-map Texas permit 20  

Question # 41

  Refer to the exhibit.  R3 cannot authenticate via TACACS. Which configuration resolves the issue? 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 42

Refer to the exhibit. An engineer configures DMVPN and receives the hub location prefix of 10.1.1.0724 on R2 and R3 The R3 prefix of 10 1.3.0/24 is not received on R2. and the R2 prefix 10.1,2.0/24 is not received on R3. Which action reserves the issue? 

A. Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the command no ip split-horizon eigrp 10 on the tunnel interface of R1 
B. There is no spoke-to-spoke connection DMVPN configuration should be modified to enable a tunnel connection between R2 and R3 and neighbor relationship confirmed by use of the show ip eigrp neighbor command 
C. Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the no ip split-horizon eigrp 10 command on the Gi0/0 interface of R1. 
D. There is no spoke-to-spoke connection DMVPN configuration should be modified with a manual neighbor relationship configured between R2 and R3 and confirmed bb use of the show ip eigrp neighbor command. 

Question # 43

The network administrator configured R1 to authenticate Telnet connections based on Cisco ISE using TACACS+. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing toward R1(192.168.1.1) with a shared secret password of Cisco123.The administrator cannot authenticate to R1 based on ISE. Which configuration fixes the issue?

A. ip tacacs-server host 192.168.1.5 key Cisco123  
B. line vty 0 4 login authentication TAC-SERV
C. line vty 0 4 login authentication telnet 
D. tacacs-server host 192.168.1.5 key Cisco123  

Question # 44

Refer to the exhibit. A network administrator notices these console messages from host 10.11.110.12 originating from interface E1/0. The administrator considers this an unauthorized attempt to access SNMP on R1. Which action prevents the attempts to reach R1 E1/0?  

A. Configure IOS control plane protection using ACL 90 on interface E1/0  
B. Configure IOS management plane protection using ACL 90 on interface E1/0  
C. Create an inbound ACL on interface E1/0 to deny SNMP from host 10.11.110.12  
D. Add a permit statement including the host 10.11.110.12 into ACL 90  

Question # 45

Refer to the exhibit. The ISP router is fully configured for customer A and customer B using the VRF-Lite feature. What is the minimum configuration required for customer A to communicate between routers A1 and A2? A. A1 interface fa0/0 description To->ISP ip add 172.31.100.1 255.255.255.0 no shut ! router ospf 100 net 172.31.100.1 0.0.0.255 area 0A2 interface fa0/0 description To->ISP ip add 172.31.200.1 255.255.255.0 no shut ! router ospf 100 net 172.31.200.1 0.0.0.255 area 0 B. A1 interface fa0/0 description To->ISP ip vrf forwarding A ip add 172.31.100.1 255.255.255.0 no shut ! router ospf 100 net 172.31.100.1 0.0.0.255 area 0A2 interface fa0/0 description To->ISP ip vrf forwarding A ip add 172.31.200.1 255.255.255.0 no shut ! router ospf 100 net 172.31.200.1 0.0.0.255 area 0 C. A1 interface fa0/0 description To->ISP ip add 172.31.200.1 255.255.255.0 no shut ! router ospf 100 net 172.31.200.1 0.0.0.255 area 0A2 interface fa0/0 description To->ISP ip add 172.31.100.1 255.255.255.0no shut ! router ospf 100 net 172.31.100.1 0.0.0.255 area 0D. A1 interface fa0/0 description To->ISP ip vrf forwarding A ip add 172.31.100.1 255.255.255.0 no shut ! router ospf 100 vrf A net 172.31.200.1 0.0.0.255 area 0 A2 interface fa0/0 description To->ISP ip vrf forwarding A ip add 172.31.100.1 255.255.255.0 no shut ! router ospf 100 vrf A net 172.31.200.1 0.0.0.255 area 0 

Question # 46

Refer to the exhibit. An engineer configured SNMP Commîmes on UserSW2 switch, but the SNMP server cannot upload modified configurations to the switch. Which configuration resolves this issue? 

A. snmp-server community Ciscowruser RW 11  
B. snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 22  
C. snmp-server community CiscOUs3r RW 11  
D. snmp-server group NETVIEW v2c priv read NETVIEW access 11  

Question # 47

 Refer to the exhibit. An engineer is troubleshooting failed access by contractors to the business application server via Telnet or HTTP during the weekend. Which configuration resolves the issue? 

A. Option  
B. Option  
C. Option  
D. Option  

Question # 48

  Refer to the exhibit. The network administrator configured the Chicago router to mutually redistribute the LA and NewYork routes with OSPF routes to be summarized as a single route in EIGRP using the longest summary mask:  After the configuration, the New York router receives all the specific LA routes but the summary route. Which set of configurations resolves the issue on the Chicago router? 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 49

Refer to the exhibit.  An engineer configures SW101 to send OSPFv3 interfaces state change messages to the server. However, only some OSPFv3 errors are being recorded. which organization resolves the ..? 

A. snmp-server enable traps ospfv3 state-change if-state-change  
B. snmp-server-enable traps ospfv3 state-change restart-status-change  
C. snmp-server-enable traps ospfv3 state-change neighbor-state-change.  
D. snmp-server-enable traps ospfv3 state-change if-state-change neighbor-state-changeAnswer: D   

Question # 50

Refer to the exhibit.  An administrator must configure the router with OSPF for IPv4 and IPv6 networks under a single process. The OSPF adjacencies are not established and did not meet the requirement. Which action resolves the issue?

A. Replace OSPF process 10 on the interface with OSPF process 1, and configure an additional router ID with IPv6 address.
B. Replace OSPF process 10 on the interface with OSPF process 1, for the VPv6 addressma nd remove process route ID with IPv6 address. 
C. Replace OSPF process 10 on the interface with OSPF process 1, and remove process 10 from the global configuration. 
D. Replace OSPF process 10 on the interface with OSPF process 1 for the IPv4 address, and remove process 10 from the global configuration. 

Question # 51

What must be configured by the network engineer to circumvent AS_PATH prevention mechanism in IP/VPN Hub and Spoke deployment scenarios? 

A. Use allows in and as-override at all Pes.  
B. Use allowas in and as-override at the PE-Hub.  
C. Use Allowas-in the PE_Hub  
D. Use as-override at the PE_Hub  

Question # 52

 Refer to the exhibit. An engineer configured NetFlow on R1, but the flows do not reach the NMS server from R1. Which configuration resolves this Issue?

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 53

Refer to the exhibit. A prefix list is created to filter routes inbound to an EIGRP process except for network 10 prefixes After the prefix list is applied no network 10 prefixes are visible in the routing table from EIGRP. Which configuration resolves the issue?

A. ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9.  
B. ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32  
C. ip prefix-list EIGRP seq 5 permit 10.0.0.0/8 ge 9 no ip prefix-list EIGRP seq 20 permit 10.0.0.0/8
D. ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9 ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32 

Question # 54

In a DMVPN network, the Spoke1 user observed that the voice traffic is coming to Spoke2 users via the hub router. Which command is required on both spoke routers to communicate directly to one another? 

A. ip nhrp map dynamic  
B. ip nhrp shortcut  
C. ip nhrp nhs multicast  
D. ip nhrp redirect  

Question # 55

Which IPv6 first hop security feature controls the traffic necessary for proper discovery of neighbor device operation and performance? 

A. RA Throttling  
B. Source or Destination Guard  
C. ND Multicast Suppression  
D. IPv6 Snooping  

Question # 56

What are the two goals of micro BFD sessions? (Choose two.) 

A. The high bandwidth member link of a link aggregation group must run BFD  
B. Run the BFD session with 3x3 ms hello timer  
C. Continuity for each member link of a link aggregation group must be verified  
D. Eny member link on a link aggregation group must run BFD  
E. Each member link of a link aggregation group must run BFD.  

Question # 57

What is an advantage of implementing BFD? 

A. BFD provides faster updates for any flapping route.  
B. BFD provides millisecond failure detection  
C. BFD is deployed without the need to run any routing protocol  
D. BFD provides better capabilities to maintain the routing table  

Question # 58

Refer to the exhibit. R4 is experiencing packet drop when trying to reach 172.16.2.7 behind R2. Which action resolves the issue? 

A. Insert a /16 floating static route on R2 toward R3 with metric 254  
B. Insert a /24 floating static route on R2 toward R3 with metric 254  
C. Enable auto summarization on all three routers R1, R2, and R3  
D. Disable auto summarization on R2  

Question # 59

  Refer to the exhibit. A network engineer must establish communication between three different customer sites with these requirements:Site-A: must be restricted to access to any users at Site-B or Site-C. Site-B and Site-C must be able to communicate between sites and share routes using OSPF.Which configuration meets the requirements? 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 60

What is a function of an end device configured with DHCPv6 guard? 

A. If it is configured as a server, only prefix assignments are permitted.  
B. If it is configured as a relay agent, only prefix assignments are permitted.  
C. If it is configured as a client, messages are switched regardless of the assigned role.  
D. If it is configured as a client, only DHCP requests are permitted.  

Question # 61

An engineer must override the normal routing behavior of a router for Telnet traffic that is destined to 10.10.10.10 from 10.10.1.0/24 via a next hop of 10.4.4.4. which is directly connected to the router that is connected to the 10.1.1.0/24 subnet Which configuration reroutes traffic according to this requirement?r 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 62

Refer to the exhibit. An administrator is configuring a GRE tunnel to establish an EIGRP neighbor to a remote router. The other tunnel endpoint is already configured. After applying the configuration as shown, the tunnel started flapping. Which action resolves the issue? 

A. Modify the network command to use the Tunnel0 interface netmask  
B. Advertise the Loopback0 interface from R2 across the tunnel  
C. Stop sending a route matching the tunnel destination across the tunnel  
D. Readdress the IP network on the Tunnel0 on both routers using the /31 netmask  

Question # 63

 Refer to the exhibit. An OSPF neighbor relationship between R2 and R3 is showing stuck in EXCHANGE/EXSTART state. The neighbor is established between R1 and R2. The network engineer can ping from R2 to R3 and vice versa, but the neighbor is still down. Which action resolves the issue?

A. Restore the Layer 2/Layer 3 conectivity issue in the ISP network.  
B. Match MTU on both router interfaces or ignore MTU.  
C. Administrative "shut then no shut" both router interfaces.  
D. Enable OSPF on the interface, which is required.  

Question # 64

Refer to the exhibit. R6 should reach R1 via R5>R2>R1. Which action resolves the issue? 

A. Increase the cost to 61 between R2-R3-R1  
B. Increase the cost to 61 between R2 and R3  
C. Decrease the cost to 2 between R6-R5-R2  
D. Decrease the cost to 41 between R2 and R1  

Question # 65

What is a characteristic of Layer 3 MPLS VPNs? 

A. LSP signaling requires the use of unnumbered IP links for traffic engineering.  
B. Traffic engineering supports multiple IGP instances  
C. Traffic engineering capabilities provide QoS and SLAs.  
D. Authentication is performed by using digital certificates or preshared keys.  

Question # 66

 A network administrator is trying to access a branch router using TACACS+ username and password credentials, but the administrator cannot log in to the router because the WAN connectivity is down. The branch router has following AAA configuration:Which command will resolve this problem when WAN connectivity is down? 

A. aaa authentication login default group tacacs+ local  
B. aaa authentication login default group tacacs+ enable  
C. aaa authentication login default group tacacs+ console  
D. aaa authentication login console group tacacs+ enable  

Question # 67

An engineer configures PBR on R5 and wants to create a policy that matches traffic destined toward 10.10.10.0/24 and forward 10.1.1.1. The traffic must also have its IP precedence set to 5.All other trafficshould be forward toward 10.1.1.2 and have its IP precedence set to 0.Which configuration meets the requirements?

A. access-list 1 permit 10.10.10.0 0.0.0.255 access-list 2 permit any route-map CCNP permit 10 match ip address 1 set ip next-hop 10.1.1.1 set ip precedence 5 ! route-map CCNP permit 20 match ip address 2 set ip next-hop 10.1.1.2 set ip precedence 0route-map CCNP permit 30
B. access-list 100 permit ip any 10.10.10.0 0.0.0.255 route-map CCNP permit 10 match ip address 100 set ip next-hop 10.1.1.1 set ip precedence 0 ! route-map CCNP permit 20 set ip next-hop 10.1.1.2 set ip precedence 5 ! route-map CCNP permit 30
C. access-list 1 permit 10.10.10.0 0.0.0.255 route-map CCNP permit 10 match ip address 1 set ip next-hop 10.1.1.1 set ip precedence 5 ! route-map CCNP permit 20 set ip next-hop 10.1.1.2 set ip precedence 0 
D. access-list 100 permit ip any 10.10.10.0 0.0.0.255 route-map CCNP permit 10 match ip address 100 set ip next-hop 10.1.1.1 set ip precedence 5 ! route-map CCNP permit 20 set ip next-hop 10.1.1.2 set ip precedence 0

Question # 68

Which mechanism must be chosen to optimize the reconvergence time for OSPF at company location 407173257 that is less CPU-intensive than reducing the hello and dead timers? 

A. BFD  
B. Dead Peer Detection keepalives  
C. SSO  
D. OSPF demand circuit  

Question # 69

What is the purpose of the DHCPv6 Guard? 

A. It messages between a DHCPv6 server and a DHCPv6 client ( or relay agent).  
B. It shows that clients of a DHCPv5 server are affected.  
C. It block DHCPv6 messages from relay agents to a DHCPv6 server.  
D. It allows DHCPv6 replay and advertisements from (rouge) DHCPv6 servers.  

Question # 70

The network administrator configured the router for Control Plane Policing to limit OSPF traffic to be policed to 1 Mbps. Any traffic that exceeds this limit must also be allowed at this point for trafficanalysis. The router configuration is:access-list 100 permit ospf any any class-map CM-OSPF match access-group 100 ! policy-map PM-COPP class CM-OSPF police 1000000 conform-action transmitcontrol-planeservice-policy output PM-COPPThe Control Plane Policing failed to monitor and police OSPF traffic. Which configuration resolves this issue?  

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 71

Refer to the exhibit. An engineer must establish multipoint GRE tunnels between hub router R6 and branch routers R1, R2, and R3. Which configuration accomplishes this task on R1?C) 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 72

Refer to the exhibit. An engineer has configured policy-based routing and applied the configured to the correct interface. How is the configuration applied to the traffic that matches the access list? 

A. It is sent to 209.165.202.131.  
B. It is sent to 209.165.202.129.  
C. It is dropped.  
D. It is forwarded using the routing table lookup.  

Question # 73

Refer to the exhibit. After configuring OSPF in R1, some external destinations in the network became unreachable. Which action resolves the issue? 

A. Clear the OSPF process on R1 to flush stale LSAs sent by other routers.  
B. Change the R1 router ID from 10.255.255.1 to a unique value and clear the process.  
C. Increase the SPF delay interval on R1 to synchronize routes.  
D. Disconnect the router with the OSPF router ID 0.0.0.0 from the network.  

Question # 74

Refer to the exhibit. An engineer is troubleshooting a TACACS problem.Which action resolves the issue?  

A. Configure a matching TACACS server IP.  
B. Configure a matching preshared key.  
C. Generate authentication from a relative source interface.  
D. Apply a configured AAA profile to the VTY.  

Question # 75

  Refer to the exhibit. Which set of commands restore reachability to loopback0? C)

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 76

Which table is used to map the packets in an MPLS LSP that exit from the same interface, via the same next hop, and have the same queuing policies? 

A. RIB  
B. FEC  
C. LDP  
D. CEF  

Question # 77

   An engineer creates a default static route on a router with a hop of 10.1.1.1. On inspection, the engineer finds the router has two VRFs, Red and Blue. The next hop is valid for both VRFs and exists in each assigned VRF. Which configuration achieves connectivity? 

A. Option A  
B. Option B  
C. Option C  
D. Option D  

Question # 78

Refer to the exhibit. When the FastEthemet0/1 goes down, the route to 172.29.0 0/16 via 192.168.253 2 is not installed in the RIB. Which action resolves the issue? 

A. Configure reported distance greater than the feasible distance  
B. Configure feasible distance greater than the successor's feasible distance.  
C. Configure reported distance greater than the successor's feasible distance.  
D. Configure feasible distance greater than the reported distance  

Question # 79

Refer to the exhibit. An engineer must filter incoming EIGRP updates to allow only a set of specific prefixes. The distribute list is tested, and it filters out all routes except network 10.10.10.0/24. How should the engineer temporarily allow all prefixes to be learned by the routers again without adjusting the existing access list? 

A. A permit 20 statement should be added before completing the ACL with the required prefixes, and then the permit 20 statement can be removed. 
B. A permit any statement should be added before completing the ACL with the required prefixes and then the permit any statement can be removed. 
C. A continue statement should be added within the permit 10 statement before completing the ACL with the required prefixes, and then the continue statement can be removed.
D. An extended access list must be used instead of a standard access list to accomplish the task 

Question # 80

Refer to the exhibit. The static route is not present in the routing table of an adjacent OSPF neighbor router. Which action resolves the issue? 

A. Configure the next hop of 10.20.20.1 in the prefix list DMZ-STATIC  
B. Configure the next-hop interface at the end of the static router for it to get redistributed  
C. Configure a permit 20 statement to the route map to redistribute the static route  
D. Configure the subnets keyword in the redistribution command  

Question # 81

What does the MP-BGP OPEN message contain? 

A. MPLS labels and the IP address of the router that receives the message  
B. the version number and the AS number to which the router belongs  
C. IP routing information and the AS number to which the router belongs  
D. NLRI, path attributes, and IP addresses of the sending and receiving routers  

Question # 82

Refer to the exhibit.  An engineer must block access to the console ports for all corporate remote Cisco devices based on the recent corporate security policy but the security team stilt can connect through the console port. Which configuration on the console port resolves the issue? 

A. transport input telnet  
B. login and password  
C. no exec  
D. exec 0.0  

Question # 83

Refer to the exhibit. During ISP router maintenance, the network produced many alerts because of the flapping interface. Which configuration on R1 resolves the issue?  

A. no snmp trap link-status  
B. snmp trap link-status down  
C. snmp trap ip verify drop-rate  
D. ip verify drop-rate notify hold-down 60  

Question # 84

 Refer to the exhibit. The administrator is troubleshooting a BGP peering between PE1 and PE3 that is unable to establish Which action resolves the issue? 

A. P2 must have a route to PE3 to establish a BGP session to PE1  
B. Disable sending ICMP unreachables on P2 to allow PE1 to establish a session with PE3  
C. Ensure that the PE3 loopback address is used as a source for BGP peering to PE1  
D. Remove the traffic filtering rules on P2 blocking the BGP communication between PE1 and PE3 

Question # 85

What is a function of IPv6 Source Guard? 

A. It works with address glean or ND to find existing addresses.  
B. It inspects ND and DHCP packets to build an address binding table.  
C. It denies traffic from known sources and allocated addresses.  
D. It notifies the ND protocol to inform hosts if the traffic is denied by it.  

Question # 86

A customer reports that traffic is not passing on an EIGRP enabled multipoint interface on a router configured as below: interface Serial0/0 no ip address interface Server0/0/0.9 multipoint ip address 10.1.1.1 255.255.255.248 ip split-horizon eigrp 1 Which action resolves the issue?

A. Enable poison reverse 
B. Enable split horizon 
C. Disable poison reverse 
D. Disable split horizon 

Question # 87

How does an MPLS Layer 3 VPN differentiate the IP address space used between each VPN? 

A. by RD 
B. by address family 
C. by MP-BGP 
D. byRT 

Question # 88

Refer to the exhibit. AS 111 mut not be used as a transit AS, but ISP-1 is getting ISP-2 routes from AS 111. Which configuration stops Customer AS from being used as a transit path on ISP-1?

A. ip as-path access-list 1 permit ^$ 
B. ip as-path access-list 1 permit_111_ 
C. ip as-path access-list 1 permit." 
D. ip as-path access-list 1 permit ^111$

Question # 89

Refer to the exhibit. Router R2 should be learning the route for 10.123.187.0/24 via EIGRP. Which action resolves the issue without introducing more issues?

A. Use distribute-list to modify the route as an internal EIGRP route 
B. Redistribute the route in EIGRP with metric, delay, and reliability 
C. Use distribute-list to filter the external router in OSPF 
D. Remove route redistribution in R2 for this route in OSPF 

Question # 90

Refer to the exhibit.

A. crypto isakmp policy 5 authentication pre-share encryption 3des hash sha group 2 ! crypto isakmp key cisco123 address 200.1.1.3 
B. crypto isakmp policy 5 authentication pre-share encryption 3des hash md5 group 2 !  crypto isakmp key cisco123 address 200.1.1.3 
C. crypto isakmp policy 5 authentication pre-share encryption 3des hash md5 group 2 ! crypto isakmp key cisco123 address 199.1.1.1 
D. crypto isakmp policy 5 authentication pre-share encryption 3des hash md5 group 2 ! crypto isakmp key cisco123! address 199.1.1.1 

Question # 91

An engineer must advertise routes into IPv6 MP-BGP and failed. Which configuration resolves the issue on R1?

A. router bgp 65000 no bgp default ipv4-unicast address-family ipv6 multicast network 2001:DB8::/64 
B. router bgp 65000 no bgp default ipv4-unicast address-family ipv6 unicast network 2001:DB8::/64 
C. router bgp 64900 no bgp default ipv4-unicast address-family ipv6 unicast network 2001:DB8::/64 
D. router bgp 64900 no bgp default ipv4-unicast address-family ipv6 multicast neighbor 2001:DB8:7000::2 translate-update ipv6 multicast

Question # 92

An engineer configured NetFlow on R1, but the NMS server cannot see the flow from R1. Which configuration resolves the issue?

A. flow monitor Flowmonitor1 destination 10.221.10.11 
B. flow exporter FlowAnalyzer1 destination 10.221.10.11 
C. interface Ethernet0/1 flow-destination 10.221.10.11
 D. interface Ethernet0/0 flow-destination 10.221.10.11 

Question # 93

An engineer is implementing a coordinated change with a server team. As part of the change, the engineer must configure interlace GigabitEthernet2 in an existing VRF "RED" then move the interface to an existing VRF "BLUE" when the server team is ready. The engineer configured interface GigabitEthemet2 in VRF "RED"  Which configuration completes the change?

A. interface GigabitEthernet2 no ip address vrf forwarding BLUE 
B. interface GigabitEthernet2 no vrf forwarding RED vrf forwarding BLUE ip address 10.0.0.0 255.255.255.254 
C. interface GigabitEthernet2 no vrf forwarding RED vrf forwarding BLUE 
D. interface GigabitEthernet2 no ip address ip address 10.0.0.0 255.255.255.254 vrf forwarding BLUE 

Question # 94

Refer to the exhibit. The authentication is not working as desired and the user drops into user-exec mode. Which configuration resolves the issue?  

A. Option A 
B. Option B
 C. Option C 
D. Option D 

Question # 95

What are two characteristics of a VRF instance? (Choose two)

 A. It is defined by the VPN membership of a customer site attached to a P device. 
B. Each VRF has a different set of routing and CEF tables. 
C. AII VRFS share customers routing and CEF tables. 
D. An interface must be associated to one VRF 
E. A customer site can be associated to different VRFs. 

Question # 96

An engineer failed to run diagnostic commands on devices using Cisco DNA Center. Which action in Cisco DNA Center resolves the issue? 

A. Enable Command Runner 
B. Enable APIs 
C. Enable CDP 
D. Enable Secure Shell

Question # 97

Refer to the exhibit.  The network administrator configured the network to connect two disjointed networks and ail the connectivity is up except the virtual link which causes area 250 to be unreachable. Which two configurations resolve this issue? (Choose two.)

A. R2 router ospf 1 router-id 10.23.23.2 
B. R2 router ospf 1 no area area 234 virtual-link 10.34.34.4 area 0 virtual-link 0.0.0.44 
C. R4 router ospf 1 no area 234 virtual-link 10.23.23.2 area 234 virtual-link 0.0.0.22 
D. R2 router ospf 1 no area 234 virtual-link 10.34.34.4 area 234 virtual-link 0.0.0.44 
E. R4 router ospf 1 no area area 234 virtual-link 10.23.23.2 area 0 virtual-link 0.0.0.22

Question # 98

Refer to the exhibit. AS111 is receiving its own routes from AS200 causing a loop in the network. Which configuration provides loop prevention?  

A. Option A 
B. Option B 
C. Option C 
D. Option D 

Question # 99

A network administrator performed a Compact Flash Memory upgrade on a Cisco Catalyst 6509 Switch. Everything is functioning normally except SNMP, which was configured to monitor the bandwidth of key interfaces but the interface indexes are changed. Which global configuration resolves the issue? 

A. snmp-server ifindex permanent 
B. snmp ifindex permanent 
C. snmp-server ifindex persist 
D. snmp ifindex persist 

Question # 100

Which two components are required for MPLS Layer 3 VPN configuration? (Choose two) 

A. Use pseudowire for Layer 2 routes 
B. Use MP-BGP for customer routes 
C. Use OSPF between PE and CE 
D. Use a unique RD per customer VRF 
E. Use LDP for customer routes 

Question # 101

A network administrator must optimize the segment size of the TCP packet on the DMVPN IPsec protected tunnel interface, which carries application traffic from the head office to a designated branch. The TCP segment size must not overwhelm the MTU of the outbound link. Which configuration must be applied to the router to improve the application performance?

A. Option A 
B. Option B 
C. Option C 
D. Option D 

Question # 102

Refer to the exhibit.  After a security audit, the administrator implemented an ACL in the route reflector. The RR became unreachable from any router in the network. Which two actions resolve the issue? (Choose two.)

A. Enable the ND proxy feature on the default gateway. 
B. Configure a link-local address on the Ethernet0/1 interface. 
C. Permit ICMPv6 neighbor discovery traffic in the ACL. 
D. Remove the ACL entry 80. 
E. Change the next hop of the default route to the link-local address of the default gateway. 

Question # 103

What is the function of BFD? 

A. It provides uniform failure detection regardless of media type. 
B. It creates high CPU utilization on hardware deployments. 
C. It negotiates to the highest version if the neighbor version differs. 
D. It provides uniform failure detection on the same media type. 

Question # 104

A bank ATM site has difficulty connecting with the bank server. A network engineer troubleshoots the issue and finds that R4 has no active route to the bank ATM site. Which action resolves the issue?

A. Advertise 10.10.30.0/24 subnet in R1 EIGRP AS. 
B. EIGRP peering between R3 and R4 to be fixed. 
C. EIGRP peering between R1 and R2 to be fixed. 
D. Advertise 10.10.30.0/24 subnet in R3 EIGRP AS. 

Question # 105

The summary route is not shown in the Router_B routing table after this below configuration on Router_A:

A. Option A 
B. Option B 
C. Option C
 D. Option D 

Question # 106

Refer to the exhibit The route to 192 168 200 0 is flapping between R1 and R2 Which set of configuration changes resolves the flapping route?

A. Option A 
B. Option B 
C. Option C 
D. Option D 

Question # 107

R1 has a route map configured, which results in a loss of partial IPv6 prefixes for the BGP neighbor, resulting in service degradation. How can the full service be restored? 

A. The neighbor requires a soft reconfiguration, and this will clear the policy without resetting the BGP TCP connection. 
B. The prefix lit requires all prefixes that R1 is advertising to be added to it, and this will allow additional prefixes to be advertised. 
C. The route map requires a deny 20 statement without set conditions, and this will allow additional prefixes to be advertised. 
D. The route map requires a permit 20 statement without set conditions, and this will allow additional prefixes to be advertised.

Question # 108

An engineer notices that R1 does not hold enough log messages to Identity the root cause during troubleshooting Which command resolves this issue?

A. Option A 
B. Option B 
C. Option C 
D. Option D 

Question # 109

Refer to the exhibit.

A. Option A 
B. Option B 
C. Option C
 D. Option D

Question # 110

Refer to the exhibit. A network engineer receives a fault ticket about traffic drops from BANK SITE to BANK Users can reach BANK SITE Y from router RA as a source. Routers RB and RD are acting as route reflectors. Which configuration resolves the issue?

A. RC(config)#router bgp 65201 RC(config-router)#neighbor 10.10.10.4 route-reflector-client 
B. RF(config)#router bgp 65201 RF(config-router)#neighbor 10.10.10.6 route-reflector-client 
C. RC(config)#router bgp 65201 RC(config-router)#neighbor 10.10.10.2 route-reflector-client 
D. RB(config)router bgp 65201 RB(config-router)#neighbor 10.10.10.3 route-reflector-client 

Question # 111

An administrator configures a router to stop using a particular default route if the DNS server 8.8.8.8 is not reachable through that route. However, this configuration did not work as desired and the default route still works even if the DNS server 8.8.8 8 is unreachable. Which two configuration changes resolve the issue? (Choose two.) 

A. Configure two static routes for the 8.8.8.8/32 destination to match the IP SLA probe for each ISP. 
B. Associate every IP SLA probe with the proper WAN address of the router. 
C. Reference the proper exit interfaces along with the next hops in both static default routes. 
D. Use a separate track object to reference the existing IP SLA 1 probe for every static route. 
E. Use a separate IP SLA probe and track object for every static route 

Question # 112

The network engineer configured the summarization of the RIP routes into the OSPF domain on R5 but still sees four different 172.16.0.0/24 networks on R4. Which action resolves the issue?

A. R5(config)#router ospf 1 R5(config-router)#no area R5(config-router)#summary-address 172.16.0.0 255.255.252.0 
B. R4(config)#router ospf 99 R4(config-router)#network 172.16.0.0 0.255.255.255 area 56 R4(config-router)#area 56 range 172.16.0.0 255,255.255.0 
C. R4(config)#router ospf 1 R4(config-router)#no area R4(config-router)#summary-address 172.16.0.0 255.255.252.0 
D. R5(config)#router ospf 99 R5(config-router)#network 172.16.0.0 0.255.255.255 area 56 R5(config-router)#area 56 range 172.16.0.0 255.255.255.0 

Question # 113

A junior engineer configured SNMP to network devices. Malicious users have uploaded different configurations to the network devices using SNMP and TFTP servers. Which configuration prevents changes from unauthorized NMS and TFTP servers?

A. access-list 20 permit 10.221.10.11 access-list 20 deny any log ! snmp-server group NETVIEW v3 priv read NETVIEW access 20 snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 20 snmp-server community Cisc0Us3r RO 20 snmp-server community Cisc0wrus3r RW 20 snmp-server tftp-server-list 20 
B. access-list 20 permit 10.221.10.11 access-list 20 deny any log ! snmp-server group NETVIEW v3 priv read NETVIEW access 20 snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 20 snmp-server community Cisc0wrus3r RO 20 snmp-server community Cisc0Us3r RW 20 snmp-server tftp-server-list 20
 C. access-list 20 permit 10.221.10.11 access-list 20 deny any log 
D. access-list 20 permit 10.221.10.11 

Question # 114

Refer to the exhibit.

A. Option A 
B. Option B 
C. Option C 
D. Option D 

Question # 115

Refer to the exhibit. An engineer is trying to log in to R1 via R3 loopback address. Which action resolves the issue? 

A. Add transport input SCP
 B. Add transport input none 
C. Remove the IPv6 traffic filter from R1, which is blocking the Telnet. 
D. Remove the IPv6 traffic from R1, which is blocking the SSH