PDF Only
$35.00 Free Updates Upto 90 Days
- 201-450 Dumps PDF
- 161 Questions
- Updated On April 15, 2024
PDF + Test Engine
$60.00 Free Updates Upto 90 Days
- 201-450 Question Answers
- 161 Questions
- Updated On April 15, 2024
Test Engine
$50.00 Free Updates Upto 90 Days
- 201-450 Practice Questions
- 161 Questions
- Updated On April 15, 2024
How to pass LPI 201-450 exam with the help of dumps?
DumpsPool provides you the finest quality resources you’ve been looking for to no avail. So, it's due time you stop stressing and get ready for the exam. Our Online Test Engine provides you with the guidance you need to pass the certification exam. We guarantee top-grade results because we know we’ve covered each topic in a precise and understandable manner. Our expert team prepared the latest LPI 201-450 Dumps to satisfy your need for training. Plus, they are in two different formats: Dumps PDF and Online Test Engine.
How Do I Know LPI 201-450 Dumps are Worth it?
Did we mention our latest 201-450 Dumps PDF is also available as Online Test Engine? And that’s just the point where things start to take root. Of all the amazing features you are offered here at DumpsPool, the money-back guarantee has to be the best one. Now that you know you don’t have to worry about the payments. Let us explore all other reasons you would want to buy from us. Other than affordable Real Exam Dumps, you are offered three-month free updates.
You can easily scroll through our large catalog of certification exams. And, pick any exam to start your training. That’s right, DumpsPool isn’t limited to just LPI Exams. We trust our customers need the support of an authentic and reliable resource. So, we made sure there is never any outdated content in our study resources. Our expert team makes sure everything is up to the mark by keeping an eye on every single update. Our main concern and focus are that you understand the real exam format. So, you can pass the exam in an easier way!
IT Students Are Using our LPIC-2 Exam 201, Part 1 of 2, version 4.5 Dumps Worldwide!
It is a well-established fact that certification exams can’t be conquered without some help from experts. The point of using LPIC-2 Exam 201, Part 1 of 2, version 4.5 Practice Question Answers is exactly that. You are constantly surrounded by IT experts who’ve been through you are about to and know better. The 24/7 customer service of DumpsPool ensures you are in touch with these experts whenever needed. Our 100% success rate and validity around the world, make us the most trusted resource candidates use. The updated Dumps PDF helps you pass the exam on the first attempt. And, with the money-back guarantee, you feel safe buying from us. You can claim your return on not passing the exam.
How to Get 201-450 Real Exam Dumps?
Getting access to the real exam dumps is as easy as pressing a button, literally! There are various resources available online, but the majority of them sell scams or copied content. So, if you are going to attempt the 201-450 exam, you need to be sure you are buying the right kind of Dumps. All the Dumps PDF available on DumpsPool are as unique and the latest as they can be. Plus, our Practice Question Answers are tested and approved by professionals. Making it the top authentic resource available on the internet. Our expert has made sure the Online Test Engine is free from outdated & fake content, repeated questions, and false plus indefinite information, etc. We make every penny count, and you leave our platform fully satisfied!
Question # 1
What effect does the –f option to the update-rc.d command have on files in the /etc/rcX.d/ and /etc/init.d/ directories?
A. It will force the removal of the symlinks in /etc/rcX.d/ even when the links are read only
B. It will remove both the symlinks in /etc/rcX.d/ and the init script in /etc/init.d/
C. It will remove the init script in /etc/init.d/ and the symlinks in /etc/rcX.d/ and update the package information of installed files
D. It will force the removal of symlinks in /etc/rcX.d/ even if the corresponding init script still exists in /etc/init.d/
Question # 2
Which of the following commands restores only those files containing lpi in their name from the archive lpifiles.tar.gz?
A. tar xvzf lpifiles.tar.gz --wildcards ‘*lpi*’
B. tar xvzwf lpifiles.tar.gz ‘*lpi*’
C. tar -xvfz lpifiles.tar.gz --deep ‘*lpi*’
D. tar -xvzf lpifiles.tar.gz --subdirs ‘*lpi*’
E. tar xvzf lpifiles.tar.gz --globbing ‘*lpi*’
Question # 3
Which command is used to install a GRUB boot loader into the master boot record?
A. grub-install
B. grub-mkconfig
C. grub-install-mbr
D. grub-glue-mbr
E. grub-mbr-setup
Question # 4
In which directory tree are files modified when changing kernel parameters using the command sysctl?
A. /sys/kernel/
B. /proc/kernel/
C. /proc/sys/
D. /lib/sys/
E. /sys/proc/
Question # 5
What is the purpose of a system mount unit?
A. It is used by the command systemd-mount and allows users to mount partitions to mount points of their choice
B. It is used only to mount network file systems to local mount points. It cannot be used for local media
C. It is created by the command systemd-fstab-generator to integrate entries from /etc/fstab into the system boot process
D. It is used by the command mount when using system to mount and unmount file systems
Question # 6
In order to gather performance data with sar over a longer period of time, which command should be run periodically from cron?
A. sa1
B. sarmon
C. sarec
D. sadf
E. sarcron
Question # 7
Which of the following commands shows capabilities and usable frequencies for the wireless interface wlan0?
A. iw phy pyh0 info
B. iw dev wlan0 info
C. iw dev wlan0 show
D. iw phy wlan0 show
E. iw phy0 show
Question # 8
A Linux server running systemd booted to rescue.target for maintenance. Which commands are used to restore the server to its usual target? (Choose two.)
A. telinit 0
B. systemctl default
C. sync
D. systemctl emergency
E. systemctl reboot
Question # 9
Which of the following init systems comes along with an own UEFI boot loader?
A. systemd
B. SysVinit
C. Upstart
D. OpenRC
E. launchd
Question # 10
Which of the following commands adds a static IPv6 address to the network interface eth0?
A. ip add addr 2001:db8::1337/64 dev eth0
B. ip -6 add addr 2001:db8::1337/64 dev eth0
C. ip addr add 2001:db8::1337/64 dev eth0
D. ip -6 addr add new 2001:db8::1337/64 dev eth0
E. ip addr add -6 2001:db8::1337/64 dev eth0
Question # 11
In the output of sar –b, what does tps stand for?
A. Terrabyte per second
B. Traffic per second
C. Transfers per second
D. Total data per second
E. Terrabit per second
Question # 12
Which of the following commands erases the contents of the /dev/sdb3 partition?
A. rm /dev/sdb3
B. dd if=/dev/zero of=/dev/sdb3
C. dd of=/dev/zero if=/dev/sdb3
D. umount /dev/sdb3
Question # 13
Which of the following commands lists IPv4 addresses and MAC addresses of network nodes that the local system has seen on its directly connected IP networks?
A. arp
B. ifconfig
C. ipadm
D. iwlist
Question # 14
What information is found in the following excerpt from the file /proc/mdstat? (Choose two.)
A. One of the disks in /dev/md0 has failed and a spare disk is used to recreate full redundancy
B. The spare disk /dev/sda1 is used to restore full redundancy after the current recovery
C. The information [UU_] means, that the raid is missing one disk and is not fully redundant
D. The device is using version 1.2 metadata to allow LILO and GRUB Legacy to use /dev/md0 as the boot partition. This would not have been necessary with GRUB2
E. The information [3/2] means that 3 RAID disks belong to the array and 2 disks are spare. Together they equal the number of available disks
Question # 15
Which of the following commands creates a Btrfs subvolume named volume in/mnt?
A. btrfs subvolume add –n volume /mnt
B. btrfs create subvolume /mnt volume
C. btrfs-subvolume create /mnt/volume
D. btrfs subvolume new volume /mnt
E. btrfs subvolume create /mnt/volume
Question # 16
Which command is used to make an exact copy, at a single point in time, of a logical volume while still allowing the original logical volume to be updated?
A. lvcclone
B. lvcreate
C. lvm2
D. lvsnap
E. lvsnapshot
Question # 17
Which of the following configuration files are used by tcpwrapper?
A. /etc/tcpd.allow and etc/tcpd.deny
B. /etc/tcpwrapper.allow and /etc/tcpwrapper.deny
C. /etc/hosts.allow and /etc/hosts.deny
D. /etc/service.allow and /etc/service.deny
Question # 18
On a Linux node with multiple active networks interfaces, each having a default route to the Internet, which default route is preferred?
A. The default route with the highest metric value
B. The default route with the highest MTU value
C. The default route with the lowest TTL value
D. The default route with the highest TTL value
E. The default route with the lowest metric value
Question # 19
Which sub command to crypsetup shows information about an encrypted LUKS partition?
A. luksDump
B. luksInfo
C. luksDebug
D. luksLS
E. luksShow
Question # 20
Which of the filter keywords below could be used in the following command: tcpdump –i eth0 ____________ 203.0.113.8 (Choose three.)
A. host
B. ip
C. src
D. dst
E. ipv6
Question # 21
Which of the following is a userspace application used to modify EFI entries on a Linux system?
A. efieditor
B. configefi
C. efimanager
D. efiboottmgr
E. efibootedit
Question # 22
After manually compiling and installing a new kernel, what has to be done regarding the initramfs?
A. To initramfs is independent of the kernel and should not be modified unless the hardware configuration of the machine has changed
B. Since the initramfs contains kernel modules, a new initramfs must be built for the new kernel
C. During the compilation of the Linux kernel, a new initramfs is built automatically. The new initramfs only needs to be installed
D. The system should be restarted since the initramfs reconfigures itself for the new kernel during the startup of the system
Question # 23
What is the purpose of an initramfs during the Linux system start?
A. It loads required modules and starts sub sytems like LVM to make the root file system accessible to the kernel
B. It moves the kernel from normal system memory to initram memory to speed up kernel access
C. It copies the root file system’s content to RAM to speed up the system and reduce writes to disk
D. It creates a ram disk to store volatile data for directories like /tmp to reduce writes to disk
Question # 24
After the downloading patch-4.6.4.xz from http://kernel.org, what are the next steps to prepare the build of a version 4.6.4 Linux kernel? (Choose two.)
A. Uncompress the file and move the resulting directory to /usr/src/linux
B. Apply the patch file to the kernel source directory containing kernel version 4.6.0
C. Apply the patch file to the kernel source directory containing kernel version 4.6.3
D. Uncompress the file using xz to get the uncompressed patch file
E. Use patch to apply the uncompressed patch file to the source directory of any previous kernel version
Question # 25
Which of the following properties should be recorded in order to monitor the quality of a network link? (Choose two.)
A. Bandwidth in both directions
B. Number of nodes using the link
C. Effective Latency
D. Number of IPv4 and IPv6 packets
E. Number of used TCP ports
Question # 26
What should be done after updating the configuration file for syslogd in order to make the changes become effective? (Choose TWO correct answers.)
A. No action is required, syslogd will notice the updated configuration file after a few minutes.
B. Send the HUP signal to the syslogd process.
C. Restart the syslogd service.
Question # 27
A web application server contains 64GB of RAM and two swap partitions on normal hard disk drives, each with a size GB. Within the last month, the average number of user sessions on this server has grown by 20 percent. At the same time, the average usage of RAM increased from 65 to 75 percent, while the swap space is almost not used at all. It is expected that the number of user sessions will continue to increase by about 15 to 20 percent each month. Which of the following reactions would be appropriate in response to these observations? (Choose two.)
A. Delay any hardware upgrade until there is a significant consumption of swap space to ensure an efficient usage of the available hardware
B. Create a RAID 1 device on the two swap partitions to avoid data loss in case swap space has to be used in the future
C. Consider the installation of an additional application server to distribute the load if the expected growth continues over several months
D. Move the web application’s scripts and content a ram disk in order to ensure fast access and to avoid the need for swap space
E. Update the hardware to increase the amount of available RAM to avoid using swap space
Question # 28
A network client has an ethernet interface (eth0) configured with an IP address in the subnet 192.168.0.0/24. This subnet has a router, with the IP address 192.168.0.1, that connects this subnet to the Internet. What needs to be done on the client to enable it to use the router as its default gateway? (Choose TWO correct answers.)
A. route add default gw 192.168.0.1 eth0
B. ifconfig eth0 defaultroute 192.168.0.1
C. ip route add default via 192.168.0.1 dev eth0
Question # 29
Which of the following commands displays the physical path of the kernel module named dummy?
A. modprobe –i dummy
B. modinfo –n dummy
C. modpath –v dummy
D. depmod –n dummy
E. modshow –p dummy
Question # 30
Which of the following wireless tools can be used to check the wireless network link quality? (Choose TWO correct answers.)
A. iwconfig
B. iwlink
C. iwscan
D. iwifi
E. iw
Question # 31
The following is an excerpt from the output of tcpdump -nli eth1 'udp': 13:03:17.277327 IP 192.168.123.5.1065 > 192.168.5.112.53: 43653+ A? lpi.org. (25) 13:03:17.598624 IP 192.168.5.112.53 > 192.168.123.5.1065: 43653 1/0/0 A 198.51.100.42 (41) Which network service or protocol was used?
A. FTP
B. HTTP
C. SSH
D. DNS
Question # 32
What does the -p3 option to the patch command do?
A. It will strip off path information from each file mentioned in the patch file up to and including the third / character.
B. patch continues execution as long as there are three or fewer errors.
C. It instructs patch to look up to three lines of context before or after the declared line in the original file for a match.
D. patch will keep three previous versions of each file in the output to prevent loss of change history.
E. It instructs patch to conform more strictly to the POSIX standard.
